The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-25-2020, 03:03 PM   #1
72c20customcamper
Registered User
 
72c20customcamper's Avatar
 
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,716
Looking for a good carb rebuilder

My local guy has shut his doors. Been there since the 50s can't blame him he was in his late 80s . But like its says need someone to rebuild my carb not exchange as it looks to be the original on my 68 327 .

One I have looked into is Carburator USA in New Jersey. Seems like they have a good reputation but I'd like to hear some opinions and options .
__________________
Mark
72 c20 custom camper Husky edition,
66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark
1969 AMX ,
1968 c20 stepside ,85 K20
1977 Suburban sold
68 anniversary.

Last edited by 72c20customcamper; 08-26-2020 at 04:55 PM.
72c20customcamper is offline   Reply With Quote
Old 08-25-2020, 03:34 PM   #2
jayoldschool
Moderator
 
Join Date: Dec 2012
Location: ON, Canada
Posts: 2,176
Re: Looking for a good carb rebuilder

The best carb rebuilder is you. You will go slow, make sure everything is perfect. Clean each part. Set floats perfectly. Use the correct matching gaskets. Put check balls where they're supposed to go. Give it a try, you'll like it.
jayoldschool is offline   Reply With Quote
Old 08-25-2020, 04:01 PM   #3
68 P.O.S.
Registered User
 
Join Date: Jan 2007
Location: Puyallup, WA
Posts: 1,662
Re: Looking for a good carb rebuilder

I was about to say the same thing haha. You'll know its been done right if you do it yourself.
__________________
72 C10 lwb fleetside -stock 350/350 combo
68 P.O.S. is offline   Reply With Quote
Old 08-25-2020, 04:10 PM   #4
72c20customcamper
Registered User
 
72c20customcamper's Avatar
 
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,716
Re: Looking for a good carb rebuilder

I used to do them all the time. But when carbs get to old they sometimes need to be more than rebuilt. The guy I knew used to recoat the metal so there was no porosity . The place in Jersey does the same.

A frankly I dont like doing it.
__________________
Mark
72 c20 custom camper Husky edition,
66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark
1969 AMX ,
1968 c20 stepside ,85 K20
1977 Suburban sold
68 anniversary.
72c20customcamper is offline   Reply With Quote
Old 08-25-2020, 04:13 PM   #5
68Gold/white
Registered User
 
Join Date: Sep 2011
Location: Ark City, Kansas
Posts: 3,405
Re: Looking for a good carb rebuilder

If you truly can't or don't want to do it yourself, call Cliff www.Cliffshighperformance.com (1-740-397-2921) Cliff does NOT build carbs any more. He IS selling parts though. I got a kit and some parts 2 weeks ago. When you call him, CLiff WILL be the one answering the phone.
Quadrajetpower.com is THE ONLY company that Cliff endorses for car rebuilding work. There may be another coming soon. You'd have to talk to Cliff about this new builder..

DO NO, DO NOT EVER trade your original carb in for a core, if you go another direction, EVER...
68Gold/white is offline   Reply With Quote
Old 08-25-2020, 05:58 PM   #6
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,677
Re: Looking for a good carb rebuilder

Quote:
Originally Posted by 68Gold/white View Post
If you truly can't or don't want to do it yourself, call Cliff www.Cliffshighperformance.com (1-740-397-2921) Cliff does NOT build carbs any more. He IS selling parts though. I got a kit and some parts 2 weeks ago. When you call him, CLiff WILL be the one answering the phone.
Quadrajetpower.com is THE ONLY company that Cliff endorses for car rebuilding work. There may be another coming soon. You'd have to talk to Cliff about this new builder..

DO NO, DO NOT EVER trade your original carb in for a core, if you go another direction, EVER...
Second for Mark at Quadrajetpower.com

Also, Ken at https://www.ebay.com/str/everydayperformancellc
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA
Steeveedee is offline   Reply With Quote
Old 08-25-2020, 06:41 PM   #7
bry593
Registered User
 
Join Date: May 2016
Location: Oklahoma
Posts: 201
Re: Looking for a good carb rebuilder

Quote:
Originally Posted by 68gold/white View Post
if you truly can't or don't want to do it yourself, call cliff www.cliffshighperformance.com (1-740-397-2921) cliff does not build carbs any more. He is selling parts though. I got a kit and some parts 2 weeks ago. When you call him, cliff will be the one answering the phone.
Quadrajetpower.com is the only company that cliff endorses for car rebuilding work. There may be another coming soon. You'd have to talk to cliff about this new builder..

Do no, do not ever trade your original carb in for a core, if you go another direction, ever...
I third the motion. Motion carried...
__________________
1971 C20 Custom Deluxe, HT383, 4L80E, 3.73 Locker, 4 Wheel Discs
bry593 is offline   Reply With Quote
Old 08-25-2020, 06:44 PM   #8
52napco
Registered User
 
Join Date: Jun 2014
Location: upstate sc
Posts: 2,095
Re: Looking for a good carb rebuilder

Bob Stone at the carb Dr. Is the man.. Restores them versus rebuilding
They are a work of art when done
52napco is offline   Reply With Quote
Old 08-25-2020, 07:41 PM   #9
71K1500
Registered User
 
Join Date: Sep 2019
Location: Lockport, MB
Posts: 24
Re: Looking for a good carb rebuilder

Give Jon at the carb shop a call. He does kits etc and may still offer rebuild services. A lot of folks with older vehicles ( back into the teens use him)
http://www.thecarburetorshop.com


Jeff
71K1500 is offline   Reply With Quote
Old 08-25-2020, 10:11 PM   #10
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
Talking Re: Looking for a good carb rebuilder

I have a guy here local in SC that has been building carburetor's his whole life. He even spent time with some of the famous NHRA dragster teams building them. He does them at his own shop.

He took my Edelbrock carburetor that the shaft was loose and fixed it. Elelbrock doesn't have a kit for it. The throttle bore linkage was leaking, it was worn out. He took it a part and made me a set of bushing's and put it back together. It ran great!

He has my Ramp truck carburetor now doing a complete rebuild on it.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 08-25-2020, 10:27 PM   #11
hounddogs!
Restoring it $200 at a time...
 
hounddogs!'s Avatar
 
Join Date: Aug 2008
Location: NE Kansas
Posts: 887
Re: Looking for a good carb rebuilder

The AFB on the Buick went to http://www.nationalcarburetors.com/ for rehab. Haven't touched it in four years since.
__________________
Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society


'68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327.

DD '09 Pilot

Weekender '65 Skylark 300-4V-4 speed

Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine.

Son's '04 F250 SuperCab 6.0
hounddogs! is offline   Reply With Quote
Old 08-25-2020, 11:59 PM   #12
Astro-Balls
Registered User
 
Astro-Balls's Avatar
 
Join Date: Feb 2019
Location: Nor Cal
Posts: 822
Re: Looking for a good carb rebuilder

I used https://www.customrebuiltcarbs.com
They did a real nice job. Runs great..
__________________
1968 C20 Fleetside 396 4sp PS PB AC CST

.
https://www.youtube.com/watch?v=RWK8GgWD4uA
Astro-Balls is offline   Reply With Quote
Old 08-26-2020, 08:50 AM   #13
68Gold/white
Registered User
 
Join Date: Sep 2011
Location: Ark City, Kansas
Posts: 3,405
Re: Looking for a good carb rebuilder

Quote:
Originally Posted by 71K1500 View Post
Give Jon at the carb shop a call. He does kits etc and may still offer rebuild services. A lot of folks with older vehicles ( back into the teens use him)
http://www.thecarburetorshop.com


Jeff
Jon does sell good parts. He no longer works on carbs, period...He does NOT correspond via internet, phone calls only, AND phone calls on Mondays and Tuesdays, ONLY!!! 1-573-392-7378
I mentioned Cliff, because he's the Quadrajet master. He has parts made that no one else offers. His accelerator pump seals are ethanol resistant, others may claim such, but are likely NOT.
Cliff can sell someone needing a Quadrajet refurbished, ALL the parts needed, Jets, metering rods, what ever. He can tailer your rebuild with the EXACT parts needed for your specific engine, AND get it right on, the first time. Getting your carb built for your specific engine/vehicle is NOT something a lot of builders can do.

It's good to hear many that have had good results with other builders.
I hear many folks going to this new, self adjusting fuel injection. I wouldn't have anything to do with it. A properly built and tuned Quadrajet will out perform those units, every time, and no need to completely rebuild a fuel system!!!

Mark, Just a thought...
Find someone to do the work, see if they will let you buy the parts. Get ALL the parts from Cliff, including the shaft bushing kit.

Last edited by 68Gold/white; 08-26-2020 at 10:12 AM.
68Gold/white is offline   Reply With Quote
Old 08-26-2020, 08:57 AM   #14
71K1500
Registered User
 
Join Date: Sep 2019
Location: Lockport, MB
Posts: 24
Re: Looking for a good carb rebuilder

I will agree that Cliff has a long and excellant reputation with the quadrajet .
You could not go wrong dealing with him.

I was unsure if Jon still rebuilt carbs. Thanks for the clarification.

Jeff
71K1500 is offline   Reply With Quote
Old 08-26-2020, 01:56 PM   #15
54blackhornet
Registered User
 
54blackhornet's Avatar
 
Join Date: Jul 2008
Location: Eastern Oregon
Posts: 2,391
Re: Looking for a good carb rebuilder

I recommend Carberator USA in Blacwood NJ. Been in business for 70 years. Did my TwoJet this year, very pleasant experience...ask for Joe..
__________________
71 C-20
07 Magnum RT AWD
54blackhornet is offline   Reply With Quote
Old 08-26-2020, 05:02 PM   #16
72c20customcamper
Registered User
 
72c20customcamper's Avatar
 
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,716
Re: Looking for a good carb rebuilder

I talked to the counter guy at East Coast Speed another place in business since the 60s they recommended Carburator USA too. A friend has one on his vette for few years and says its preformed perfectly the whole time so I'm going to give them a try .

Thanks for info
__________________
Mark
72 c20 custom camper Husky edition,
66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark
1969 AMX ,
1968 c20 stepside ,85 K20
1977 Suburban sold
68 anniversary.
72c20customcamper is offline   Reply With Quote
Old 08-26-2020, 06:56 PM   #17
71CHEVYSHORTBED402
Senior Member
 
71CHEVYSHORTBED402's Avatar
 
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,322
Re: Looking for a good carb rebuilder

Business must be slow at a shop I use, suddenly the owner wants to rebuild my carb. The carb works quite well as is, but what the heck, it's kind of a project. You should see this guy's shop, clean as a whistle. He's setting me up with a divorce choke as well -looking forward to it.

A childhood friend has worked for him 45 years now, amazing to me. He's short and skinny, you should see him on the "diving board" above an engine compartment. He's a surgeon and everything spotless. The shop gets the maiden start on my C10.
__________________
Tony
71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025
71CHEVYSHORTBED402 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:48 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com