Wizit's bagged 60 GMC build V2.0 - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

88Stanger · 11-16-2020, 06:41 PM

love this build....

Wizit247 · 12-13-2020, 01:22 AM

Ive been spending a lot of time working on a new design for some of the front end components. I will be going to a unit bearing style hub and a billet spindle assemblies that I will machine.

I got in the front calipers so I can integrate mounts for them into the spindle design.
They are factory 6 piston Brembo calipers from a Cadillac CTSV. They are designed for 14.5" rotors but I have seen them used with success on the same 16.5" rotors that I am running. Pictures do not do justice to the size of these brakes.

Heres a sneak peak at the spindle design. It utilizes a unit bearing from a half ton Chevy pickup. They will be all billet aluminum.

I also got a loaner th400 so I can start working on motor placement and motor mounts. I have some special things planned for the motor mounts as well. Even more billet!

joesscamaro · 12-13-2020, 08:53 AM

This truck is going to be crazy! Look forward to the progress��

SCOTI · 12-13-2020, 01:22 PM

Some very cool ideas.

aggie91 · 12-14-2020, 02:43 PM

Very cool indeed. Any thought to doing billet lower control arms for the front?

Wizit247 · 01-14-2021, 03:38 PM

Quote:

Originally Posted by aggie91

Very cool indeed. Any thought to doing billet lower control arms for the front?

I dont think I will do billet lowers but the knuckle and uppers will be billet.

Wizit247 · 01-14-2021, 03:48 PM

Theres hasnt been much movement on the build the last few weeks. I have been just working on the design for the billet spindle set up.

I did invest in a large format 3d printer that I can utilize to prototype some of the machined parts to verify fitments, geometry, etc.
It is a Creality Ender 5 Plus.

I also invested in a larger cnc plasma cutter. I had an original Langmuir 24"x24" unit. I upgraded to their larger pro unit that also has Torch height control. I paired it with a new Hypertherm 45xp power unit and machine torch. Im very happy with the quality of cuts Im getting out of this set up!
(This pic has my old power unit hooked up while i was waiting for the new Hypertherm to arrive)

SCOTI · 01-14-2021, 04:09 PM

Oooooo..... Nice. New. Tools.

Envy in 3.... 2.. 1.

roll_the_dice · 01-14-2021, 07:57 PM

Love the CNC plasma cutter! So many nice tools out there!

88Stanger · 01-15-2021, 11:55 AM

Damnit, i am having a drooling issue here.... that is awesome!!!

11-16-2020, 06:41 PM	#76
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: Wizit's bagged 60 GMC build V2.0 love this build....

12-13-2020, 01:22 AM	#77
Wizit247 Registered User Join Date: Jun 2015 Location: North Idaho Posts: 99	Re: Wizit's bagged 60 GMC build V2.0 Ive been spending a lot of time working on a new design for some of the front end components. I will be going to a unit bearing style hub and a billet spindle assemblies that I will machine. I got in the front calipers so I can integrate mounts for them into the spindle design. They are factory 6 piston Brembo calipers from a Cadillac CTSV. They are designed for 14.5" rotors but I have seen them used with success on the same 16.5" rotors that I am running. Pictures do not do justice to the size of these brakes. Heres a sneak peak at the spindle design. It utilizes a unit bearing from a half ton Chevy pickup. They will be all billet aluminum. I also got a loaner th400 so I can start working on motor placement and motor mounts. I have some special things planned for the motor mounts as well. Even more billet! __________________ Over the top, billet infused, ground up 60 GMC build http://6772chevytrucks.com/vboard/showthread.php?t=809901 Last edited by Wizit247; 12-13-2020 at 01:30 AM.

12-13-2020, 08:53 AM	#78
joesscamaro Registered User Join Date: Sep 2008 Location: Newport, North Carolina Posts: 643	Re: Wizit's bagged 60 GMC build V2.0 This truck is going to be crazy! Look forward to the progress��

12-13-2020, 01:22 PM	#79
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Re: Wizit's bagged 60 GMC build V2.0 Some very cool ideas. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-14-2020, 02:43 PM	#80
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Wizit's bagged 60 GMC build V2.0 Very cool indeed. Any thought to doing billet lower control arms for the front? __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

01-14-2021, 03:48 PM	#82
Wizit247 Registered User Join Date: Jun 2015 Location: North Idaho Posts: 99	Re: Wizit's bagged 60 GMC build V2.0 Theres hasnt been much movement on the build the last few weeks. I have been just working on the design for the billet spindle set up. I did invest in a large format 3d printer that I can utilize to prototype some of the machined parts to verify fitments, geometry, etc. It is a Creality Ender 5 Plus. I also invested in a larger cnc plasma cutter. I had an original Langmuir 24"x24" unit. I upgraded to their larger pro unit that also has Torch height control. I paired it with a new Hypertherm 45xp power unit and machine torch. Im very happy with the quality of cuts Im getting out of this set up! (This pic has my old power unit hooked up while i was waiting for the new Hypertherm to arrive) __________________ Over the top, billet infused, ground up 60 GMC build http://6772chevytrucks.com/vboard/showthread.php?t=809901

01-14-2021, 04:09 PM	#83
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Re: Wizit's bagged 60 GMC build V2.0 Oooooo..... Nice. New. Tools. Envy in 3.... 2.. 1. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-14-2021, 07:57 PM	#84
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: Wizit's bagged 60 GMC build V2.0 Love the CNC plasma cutter! So many nice tools out there! __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

01-15-2021, 11:55 AM	#85
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: Wizit's bagged 60 GMC build V2.0 Damnit, i am having a drooling issue here.... that is awesome!!! __________________ John 3:16 - Saved me... God Bless



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.