Anyone recognize these mirrors? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**georgieb51** · 12-20-2020, 01:59 PM

I just picked up these mirrors a few days ago from a fellow who found a bunch of 67-72 GM truck parts on the property he recently bought in Nevada. I got two sets of mirrors and just wondered if these are OEM for our trucks?

**georgieb51** · 12-20-2020, 02:03 PM

Here are a few more photos. Thanks for your replies and expert opinions!

Andy4639 · 12-20-2020, 02:09 PM

They look like the ones that came on my 71 when I bought it. The picture shows the mounts but I had already swapped mirrors.

**Stocker** · 12-20-2020, 03:02 PM

They look similar to 1972-only DG4 mirrors except for having bolts instead of studs & acorn nuts at both ends of the curved mirror support.
However, the upper brackets look like they are from earlier (68-71) DG4 mirrors.

**georgieb51** · 12-20-2020, 03:09 PM

Quote:

Originally Posted by Stocker

They look similar to 1972-only DG4 mirrors except for having bolts instead of studs & acorn nuts at both ends of the curved mirror support.

Thanks . I had a similar thought, especially about the bolts. But on a 1972 DG4 the small top bar of the mounting tripod would have been straight. I actually wonder if this top bar was bent over by the previous owner. I also wondered if the 1971 DG4 had a bent-over top bar. I have owned a 1972 DG4 and clearly remember the top bar was straight, but sadly I threw those mirrors out many years ago. I hope some DG4 experts chime in.

**Stocker** · 12-20-2020, 05:32 PM

Yeah, I was referring to the small top bar when I edited the post to include 'upper brackets'. Your post beat me to my edit!

I think you have a mix of parts. Top bar is pre-72, 90* arm is likely aftermarket (hence the bolts), and lower arms are 72-only (shorter than pre-72).

Pics:
1972 only

Pre 1972

**special-K** · 12-20-2020, 06:53 PM

The factory arms are all round. The flat upper arm, at least, is aftermarket. Also, the 69-71 DG4 upper arm is bent 'down' at the body. Yours are bent 'up' like '72s, only bent harder

custom10nut · 12-20-2020, 07:04 PM

I have the White version on MY truck.
They were when I bought her.
I put the Sport mirrors on for about a year, but because of the poor field of vision, and HUGE blind spots, I took them off and went back to the “White Elephant Ears”.
I don’t think I’ll ever change again

**Stocker** · 12-20-2020, 07:17 PM

Quote:

Originally Posted by special-K

The factory arms are all round. The flat upper arm, at least, is aftermarket. Also, the 69-71 DG4 upper arm is bent 'down' at the body. Yours are bent 'up' like '72s, only bent harder

Good eye, Tim! I missed that his upper arms are flat. And I assumed they were pre-72 arms turned upside down. That's why you get the big bucks!

**special-K** · 12-21-2020, 06:45 AM

What you posted was all correct. I just added to it. I think you're ready for a raise

**Dieselwrencher** · 12-21-2020, 08:15 AM

George, sorry to hijack, but how's that 69 coming along?

**georgieb51** · 12-22-2020, 12:40 AM

Quote:

Originally Posted by Dieselwrencher

George, sorry to hijack, but how's that 69 coming along?

I do not mind being hijacked by you Ryan! It is a 70, but same thing essentially. I think I promised you some photos but forgot. It is getting closer. Started out with a drunk in one shop. Now in the second shop, and the fellow disassembled everything and painted every part on the frame and suspension individually with black Imron. The cab has been totally repaired and painted. I recently repaired the bed and decided to use a new bedside and bed floor and the fit was perfect with repro parts. So it is getting closer. After I lost all the originality I opted to try using an LS motor for the first time. Thanks for asking.
I previewed these photos and they were upright from where I stored them but all but the first one got posted sideways. I have no idea why. This happens to me once in a while. Wish I knew how to solve it before posting. If someone knows I sure would like to know how to rotate them after posting.

**georgieb51** · 12-22-2020, 12:44 AM

Quote:

Originally Posted by special-K

The factory arms are all round. The flat upper arm, at least, is aftermarket. Also, the 69-71 DG4 upper arm is bent 'down' at the body. Yours are bent 'up' like '72s, only bent harder

Thanks for the infor Tim. I always pay attention whenever you are talking. Of course I always have the option of ignoring you. Basically what I can see is that somewhere in these mirrors is a basis for building a DG4 mirror. Change the top piece. Save the lower V piece. Get new elbows and also a new top piece. Mirror heads are probably ok after polishing. Any other suggestions? Sell them as is?

**Dieselwrencher** · 12-22-2020, 08:29 AM

George, it is looking great! It is going to make for a very nice truck!

**georgieb51** · 12-22-2020, 12:58 PM

Quote:

Originally Posted by Dieselwrencher

George, it is looking great! It is going to make for a very nice truck!

After that first episode where you helped me save my truck I have learned to be patient and take my time. I will never forget your generosity. You are a good man.

**Dieselwrencher** · 12-23-2020, 06:45 AM

Quote:

Originally Posted by georgieb51

After that first episode where you helped me save my truck I have learned to be patient and take my time. I will never forget your generosity. You are a good man.

That was no problem at all, I help when ever I can. The whole situation just blew my mind. I just couldn't stand the thoughts on how they were treating you and basically going to sell your truck out from under you. I'm very glad Barney's was willing to work with us and let us get it out of there.

**georgieb51** · 12-24-2020, 05:24 PM

I actually stopped by to thank Barney but he was out on a call at the time. He was good about the whole thing. I definitely was fortunate to have help from you two.
Marry Christmas.

57taskforce · 12-24-2020, 06:18 PM

Looking awesome!!!! Which ls engine crossmember did you use if you don’t mind me asking? I’m weighing the options as we speak.

**georgieb51** · 12-24-2020, 10:35 PM

I wish I knew. I let someone far more experinced than me make that decision. This guy is an excellent fabricator and he told me it was for cheaper to buy one that some else had already designed just for these trucks.

44carl · 12-24-2020, 11:11 PM

RV and sometimes dealerships added these mirrors in mass to Chevy trucks all over. Kinda generic lot but with nostalgic value.

12-20-2020, 01:59 PM	#1
georgieb51 Senior Member Join Date: Aug 2014 Location: cooperstown. ny Posts: 1,576	Anyone recognize these mirrors? I just picked up these mirrors a few days ago from a fellow who found a bunch of 67-72 GM truck parts on the property he recently bought in Nevada. I got two sets of mirrors and just wondered if these are OEM for our trucks? Attached Images __________________ 1972 Chevy Custom Deluxe Highlander, owned 34 years. 1970 GMC Sierra Grande 2500, unrestored, original. 1970 Chevy K10 Short Wide-bed, working on restoration.. 1967 Chevy K10 Short Stepside, unrestored original. 1969 GMC CST (Longhorn) 396, buckets, unrestored. 1995 GMC K2500, 65,000 miles, 454.

12-20-2020, 02:03 PM	#2
georgieb51 Senior Member Join Date: Aug 2014 Location: cooperstown. ny Posts: 1,576	Re: Anyone recognize these mirrors? Here are a few more photos. Thanks for your replies and expert opinions! Attached Images __________________ 1972 Chevy Custom Deluxe Highlander, owned 34 years. 1970 GMC Sierra Grande 2500, unrestored, original. 1970 Chevy K10 Short Wide-bed, working on restoration.. 1967 Chevy K10 Short Stepside, unrestored original. 1969 GMC CST (Longhorn) 396, buckets, unrestored. 1995 GMC K2500, 65,000 miles, 454.

12-20-2020, 02:09 PM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Anyone recognize these mirrors? They look like the ones that came on my 71 when I bought it. The picture shows the mounts but I had already swapped mirrors. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-20-2020, 03:02 PM	#4
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,688	Re: Anyone recognize these mirrors? They look similar to 1972-only DG4 mirrors except for having bolts instead of studs & acorn nuts at both ends of the curved mirror support. However, the upper brackets look like they are from earlier (68-71) DG4 mirrors. __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

12-20-2020, 05:32 PM	#6
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,688	Re: Anyone recognize these mirrors? Yeah, I was referring to the small top bar when I edited the post to include 'upper brackets'. Your post beat me to my edit! I think you have a mix of parts. Top bar is pre-72, 90* arm is likely aftermarket (hence the bolts), and lower arms are 72-only (shorter than pre-72). Pics: 1972 only Pre 1972 __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

12-20-2020, 06:53 PM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Anyone recognize these mirrors? The factory arms are all round. The flat upper arm, at least, is aftermarket. Also, the 69-71 DG4 upper arm is bent 'down' at the body. Yours are bent 'up' like '72s, only bent harder __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-20-2020, 07:04 PM	#8
custom10nut Registered User Join Date: Apr 2015 Location: East Tn (In the heart of the Smoky Mtns) Posts: 1,882	Re: Anyone recognize these mirrors? I have the White version on MY truck. They were when I bought her. I put the Sport mirrors on for about a year, but because of the poor field of vision, and HUGE blind spots, I took them off and went back to the “White Elephant Ears”. I don’t think I’ll ever change again

12-21-2020, 06:45 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Anyone recognize these mirrors? What you posted was all correct. I just added to it. I think you're ready for a raise __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-21-2020, 08:15 AM	#11
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Anyone recognize these mirrors? George, sorry to hijack, but how's that 69 coming along? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

12-22-2020, 08:29 AM	#14
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Anyone recognize these mirrors? George, it is looking great! It is going to make for a very nice truck! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

12-24-2020, 05:24 PM	#17
georgieb51 Senior Member Join Date: Aug 2014 Location: cooperstown. ny Posts: 1,576	Re: Anyone recognize these mirrors? I actually stopped by to thank Barney but he was out on a call at the time. He was good about the whole thing. I definitely was fortunate to have help from you two. Marry Christmas. __________________ 1972 Chevy Custom Deluxe Highlander, owned 34 years. 1970 GMC Sierra Grande 2500, unrestored, original. 1970 Chevy K10 Short Wide-bed, working on restoration.. 1967 Chevy K10 Short Stepside, unrestored original. 1969 GMC CST (Longhorn) 396, buckets, unrestored. 1995 GMC K2500, 65,000 miles, 454.

12-24-2020, 06:18 PM	#18
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,442	Re: Anyone recognize these mirrors? Looking awesome!!!! Which ls engine crossmember did you use if you don’t mind me asking? I’m weighing the options as we speak. __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

12-24-2020, 10:35 PM	#19
georgieb51 Senior Member Join Date: Aug 2014 Location: cooperstown. ny Posts: 1,576	Re: Anyone recognize these mirrors? I wish I knew. I let someone far more experinced than me make that decision. This guy is an excellent fabricator and he told me it was for cheaper to buy one that some else had already designed just for these trucks. __________________ 1972 Chevy Custom Deluxe Highlander, owned 34 years. 1970 GMC Sierra Grande 2500, unrestored, original. 1970 Chevy K10 Short Wide-bed, working on restoration.. 1967 Chevy K10 Short Stepside, unrestored original. 1969 GMC CST (Longhorn) 396, buckets, unrestored. 1995 GMC K2500, 65,000 miles, 454.

12-24-2020, 11:11 PM	#20
44carl Registered User Join Date: Mar 2016 Location: paris texas Posts: 9	Re: Anyone recognize these mirrors? RV and sometimes dealerships added these mirrors in mass to Chevy trucks all over. Kinda generic lot but with nostalgic value.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.