Install a c-notch .... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71sub · 07-12-2004, 02:42 PM

I'm in GREAT need correct the previous-owner home-made c-notch in my 71 since I'm constantly bottoming out when I hit any "lips" on the street or holes.

How hard is it to install with the bed on -- OR should I remove the bed ?
Also, can I cut the frame w/o a plasma OR will a cutting wheel be fine ?
Finally, should I just bolt and weld / just weld / or just bolt ?

Thanks for any insight !!!!!!

Ev

Slammed67 · 07-12-2004, 02:57 PM

I cut mine with a grinder/cut-off wheel and a saw-zall. I think the instrucitons say it can be installed with the bed on but it would obvioulsy be easier with the bed off. Mine is plenty stong with bolts only.

guitarornothin · 07-12-2004, 03:50 PM

any pics?

**Classic Heartbeat** · 07-12-2004, 04:38 PM

You should read up on our Panel project. Starting on page 14 we show how to install the bolt in "C" notch kit. (with pictures) Here is a link:
http://www.classicheartbeat.com/panel_14.htm
WES www.ClassicHeartbeat.com

07-12-2004, 02:42 PM	#1
71sub Registered User Join Date: May 2002 Location: Stockton, CA Posts: 169	Install a c-notch .... I'm in GREAT need correct the previous-owner home-made c-notch in my 71 since I'm constantly bottoming out when I hit any "lips" on the street or holes. How hard is it to install with the bed on -- OR should I remove the bed ? Also, can I cut the frame w/o a plasma OR will a cutting wheel be fine ? Finally, should I just bolt and weld / just weld / or just bolt ? Thanks for any insight !!!!!! Ev __________________ 71 C/10 : 350 / 700r4 ; Ford 9" posi 3.50 with 31x10.5 rear tires, single drive shaft, C-notch, 2.5" drop spindles, keyless entry 71 Suburban 350/350 -- caddy tail lights, keyless entry, late model seats, billet Autometer instrument cluster 70 Ford Torino -- 351W (balanced & blueprinted ), C4, VDO gauges Last edited by 71sub; 07-12-2004 at 02:45 PM.

07-12-2004, 02:57 PM	#2
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	I cut mine with a grinder/cut-off wheel and a saw-zall. I think the instrucitons say it can be installed with the bed on but it would obvioulsy be easier with the bed off. Mine is plenty stong with bolts only. __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

07-12-2004, 03:50 PM	#3
guitarornothin RUNN over AGAIN!!! Join Date: Jun 2003 Location: Big Spring, Texas Posts: 505	any pics? __________________ 67-72 TRUCKS ROCK 70 SWB shaved and a 72 front clip.and a poly tank. Peep mirrors and a BIG BLOCK 468 in the making. XNXNXNXNXNXNXNXNXNXNX ,/. EMAIL ME HERE!, Dont pm me please ,/.

07-12-2004, 04:38 PM	#4
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	You should read up on our Panel project. Starting on page 14 we show how to install the bolt in "C" notch kit. (with pictures) Here is a link: http://www.classicheartbeat.com/panel_14.htm WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.