Parting 87 Crew Cab Dually - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BigBlockBurris · 07-12-2004, 09:21 PM

Parting a 1987 Chevy Crew Cab Dually.
Fuel injected 454
Solid A/C cab and 4 doors (PW & PL)
Dana 70
Complete truck minus bed, rear fenders, and wheels and tires. Truck runs and drives. Let me know what you need.

BBB

Chevyguy111786 · 07-12-2004, 10:30 PM

any seat belts? what color? shoulder or lap?

GMC1tondually4dr · 07-12-2004, 11:26 PM

BBB; What gears in the rearend?
How many bolts hold the rear cover on?
What color is the interior?
How much for what's left?
Is the chassis all rusty?
Do you have any pictures? -serious questions

What is your hat size?

What is your shoe size? :p

Do you wear a belt or suspenders?

-not so serious questions

Thanks

CCDually

BigBlockBurris · 07-13-2004, 06:18 AM

The interior is tan, it was a work truck so it is pretty rough.
I don't know how many bolts are on the rear end cover?!? It is a Dana 70 full width dually rear end. It is suppose to be 4.10 geared but I have not pulled the cover to be sure. Frame is 100% solid.

BBB

tomSmith · 07-13-2004, 06:45 AM

Are the front doors in good shape, any rust ??/ How much for the two ?

Beyond · 07-13-2004, 10:00 AM

I'm looking for a good AC compressor and the lines for an 87 big block truck. Is yours any good? I also need the trim piece that goes on the left rear of the cab if it's in good shape. Got any pictures?

BigBlockBurris · 07-13-2004, 09:29 PM

Tomsmith,

Doors are good, no rust. Both have PW & Pl. Passenger side will nor roll up and down. I have some friends that live near Port Clinton Ohio. They are usually down here once or twice a year. If you need any good sheetmetal I sure I can get it that far if you can pick it up. $125 for both doors.

Beyond,

The belt is off of the AC so I would say it is locked up.

BBB

454malibuwagon · 07-15-2004, 11:18 PM

was wondering if it had dual tanks and if so what would you want for the the wireing harness for the tanks ( cab back to sending units) and the fuel lines from the tanks forward to the engine. i am converting my crew cab dually to fuel injection and this would save me from having to cut mine of my donor truck and trying to extend them.

zyggy72 · 07-16-2004, 09:33 AM

Would you be willing to part the motor as well? I'm looking to convert a 454 that I have to fuel injection so I would need the intake, TBI, & the wiring harness. How much would you want for them?

07-12-2004, 09:21 PM	#1
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	Parting 87 Crew Cab Dually Parting a 1987 Chevy Crew Cab Dually. Fuel injected 454 Solid A/C cab and 4 doors (PW & PL) Dana 70 Complete truck minus bed, rear fenders, and wheels and tires. Truck runs and drives. Let me know what you need. BBB

07-12-2004, 11:26 PM	#3
GMC1tondually4dr Registered User Join Date: Jun 2004 Location: Rosemount, MN Posts: 341	Dually stuff BBB; What gears in the rearend? How many bolts hold the rear cover on? What color is the interior? How much for what's left? Is the chassis all rusty? Do you have any pictures? -serious questions What is your hat size? What is your shoe size? :p Do you wear a belt or suspenders? -not so serious questions Thanks CCDually Last edited by GMC1tondually4dr; 07-12-2004 at 11:32 PM.

07-13-2004, 06:18 AM	#4
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	87 Crew Cab Dually The interior is tan, it was a work truck so it is pretty rough. I don't know how many bolts are on the rear end cover?!? It is a Dana 70 full width dually rear end. It is suppose to be 4.10 geared but I have not pulled the cover to be sure. Frame is 100% solid. BBB

07-13-2004, 06:45 AM	#5
tomSmith Registered User Join Date: Feb 2004 Location: North Bend , Ohio Posts: 54	doors Are the front doors in good shape, any rust ??/ How much for the two ?

07-13-2004, 10:00 AM	#6
Beyond Registered User Join Date: Feb 2002 Location: La Harpe, KS Posts: 68	I'm looking for a good AC compressor and the lines for an 87 big block truck. Is yours any good? I also need the trim piece that goes on the left rear of the cab if it's in good shape. Got any pictures? __________________ 1972 C10 Daily Driver Project Truck 1971 Nova 9 second Tire Fryer 1988 Burb 1987 454 Dually Crew Cab

07-12-2004, 10:30 PM	#2
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	any seat belts? what color? shoulder or lap?

07-13-2004, 09:29 PM	#7
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	Doors and AC Tomsmith, Doors are good, no rust. Both have PW & Pl. Passenger side will nor roll up and down. I have some friends that live near Port Clinton Ohio. They are usually down here once or twice a year. If you need any good sheetmetal I sure I can get it that far if you can pick it up. $125 for both doors. Beyond, The belt is off of the AC so I would say it is locked up. BBB

07-15-2004, 11:18 PM	#8
454malibuwagon Registered User Join Date: Apr 2004 Location: iowa Posts: 47	was wondering if it had dual tanks and if so what would you want for the the wireing harness for the tanks ( cab back to sending units) and the fuel lines from the tanks forward to the engine. i am converting my crew cab dually to fuel injection and this would save me from having to cut mine of my donor truck and trying to extend them.

07-16-2004, 09:33 AM	#9
zyggy72 Can't kick the addiction! Join Date: Jan 2002 Location: Riverton, CT 06065 Posts: 402	Would you be willing to part the motor as well? I'm looking to convert a 454 that I have to fuel injection so I would need the intake, TBI, & the wiring harness. How much would you want for them?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.