![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
![]() Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,331
|
1968 C20 Hubcap Restoration
This is kind of a thread in two parts, my review of POR 15's Rust Remover, and what might turn into a restoration of a set of hubcaps I acquired.
I've used POR 15's most popular product - their black primer - before and although some people love it and some people do not, I found it to do the trick for the little jobs I needed it for. I recently learned that it is the recommended primer (by Mar-K, no less) for bed wood, which I will be trying as soon as I get around to it. So I had high expectations for their rust remover. It was cheaper than I thought it would be, I think $40 US on Amazon for a gallon. 1968 Hubcaps are a one-year only cap as far as I know, and since my truck is a C20 the caps I needed were pretty specific. I could not afford - or justify - spending a lot of money on these, and after a year or more of searching I did find a "driver quality" set on ebay. I didn't think I could even afford these ones, but they accepted my "best offer" and I was happy with the price. They cost more than I paid for the truck, but thats not saying much, virtually everything I spend on that truck exceeds the purchase price. Perhaps more hilarious is the fact that the E250 rims I lovingly sandblasted and painted have no hubcap nubs, haha. So while I type this I am acquiring some 70's ones that do. My build thread is in my signature if anyone is curious. They arrived as pictured on ebay, covered in surface rust and dirt, cobwebs and caterpillars. After a bath in just hot water I scrubbed the fronts with micro fiber cloth and the back sides with a green scotchbrite. Then I dried them, and one by one I soaked in them in a large salad bowl with the entire gallon of rust remover. The instructions said for light rust 20 minutes would be fine. Of course I checked after 20 minutes, and saw no discernable difference. It also said for heavy rust, to leave them overnight. Alright, I guess this is heavy rust, so I'll do that, I thought. I came back to them the next day and saw no change, and was pretty annoyed. But, I pulled them out, gave them another soak in hot water and knocked off some more rust particles with the microfibre and the scotch brite, and soaked them again over night. This time when I came back there was a noticeable difference and I got the below result. I think if I kept repeating this I would get slightly better results, this stuff does not touch paint, it does not seem like you can overdo it. I might still do another couple applications of this, but keep in mind I have four caps and one salad bowl, so the below results took 8 days. When I was finished I poured the rust remover through a coffee filter and returned it to the jug: I am sure I still have at least 95% of a gallon to re-use.
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 Last edited by dagnabbitt; 07-09-2021 at 04:10 PM. |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,331
|
Re: 1968 C20 Hubcap Restoration
It was only at this point that it became clear that two of these caps were original, and two were amateurishly handpainted: with a brush, no less. They are the two on the left, obviously.
So, I have to now decide if I want to leave them as is, or try and make them prettier. I would need to the correct paint codes and whatnot, or I risk making them look silly. Not sure where to go next. And if I do I leave them as is, should I seal them in some way to keep them from deteriorating again? Wax, clearcoat? Interested in some opinions, thanks in advance.
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,469
|
Re: 1968 C20 Hubcap Restoration
I use Rust911 works well . I used to use evaporust haven’t tried the POR15. The caps after paint is cared for just like the body wash and wax . They do get beat up from road debris so they will deteriorate faster .
__________________
Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary. |
![]() |
![]() |
![]() |
#4 | |
Registered User
Join Date: Feb 2007
Location: west coast
Posts: 3,371
|
Re: 1968 C20 Hubcap Restoration
Quote:
|
|
![]() |
![]() |
![]() |
Bookmarks |
|
|