GA 60-62 4 speed steering column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**cwcarpenter98** · 04-11-2021, 06:30 PM

Got a 4 speed steering column. It probably needs bearings, but looks like it has the wiring for the turn signal switch in tact. Currently not able to ship because I don't have my steering wheel puller here in Milledgeville.

The steering wheel has cracks, but it is the bigger wheel.

$130 for column with the steering wheel.
$100 for just column
$50 for steering wheel if you want me to pull it off the column. - $old

I don't have the time to get quotes to ship stuff right now, so local pickup on these.

Also have a set of hood hinges with springs. Will update with price after I check how much play is in the rivets

**cwcarpenter98** · 05-11-2021, 09:44 PM

Ttt

**cwcarpenter98** · 06-19-2021, 04:13 PM

Steering wheel sold for $40 locally.

Will sell column for $80. Now that the wheel is gone, I could probably ship the column since it's a lot smaller now

**cwcarpenter98** · 07-15-2021, 11:21 PM

Open to offers on the column. If you need it, lets make a deal!

04-11-2021, 06:30 PM	#1
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Jasper, GA Posts: 4,585	60-62 4 speed steering column Got a 4 speed steering column. It probably needs bearings, but looks like it has the wiring for the turn signal switch in tact. Currently not able to ship because I don't have my steering wheel puller here in Milledgeville. The steering wheel has cracks, but it is the bigger wheel. $130 for column with the steering wheel. $100 for just column $50 for steering wheel if you want me to pull it off the column. - $old I don't have the time to get quotes to ship stuff right now, so local pickup on these. Also have a set of hood hinges with springs. Will update with price after I check how much play is in the rivets Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 350, Saginaw 4 speed "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson Last edited by cwcarpenter98; 06-19-2021 at 04:13 PM.

05-11-2021, 09:44 PM	#2
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Jasper, GA Posts: 4,585	Re: 60-62 4 speed steering column Ttt __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 350, Saginaw 4 speed "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

06-19-2021, 04:13 PM	#3
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Jasper, GA Posts: 4,585	Re: 60-62 4 speed steering column Steering wheel sold for $40 locally. Will sell column for $80. Now that the wheel is gone, I could probably ship the column since it's a lot smaller now __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 350, Saginaw 4 speed "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

07-15-2021, 11:21 PM	#4
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Jasper, GA Posts: 4,585	Re: 60-62 4 speed steering column Open to offers on the column. If you need it, lets make a deal! __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 350, Saginaw 4 speed "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.