Wheel vintiques 62 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ky-donzi · 08-30-2021, 09:14 PM

Has anyone used these?

I was going to order a set and the tech from wheel vintiques said he didn’t think they would clear the caliper. There is a pic on summits website with a k5 using them

https://www.summitracing.com/parts/wvi-62-5806044

cadillac_al · 08-30-2021, 09:35 PM

I can't imagine why they wouldn't clear the calipers. They look exactly like stock only a couple inches wider.

ky-donzi · 08-31-2021, 08:07 AM

Wheel tech at wheel vintique said because of the “drop down” the part of the wheel that drops down for tire mounting.

Summit shows a pic of the wheel on a 4x4 k5, but who knows if that pic is even a WV wheel, says it is but who knows...

Was hoping someone had firsthand knowledge of this wheel on a 4x4...really wanting it with a set of dog dish hubcaps I have

ky-donzi · 08-31-2021, 10:02 AM

Wheel tech at wheel vintique said because of the “drop down” the part of the wheel that drops down for tire mounting.

Summit shows a pic of the wheel on a 4x4 k5, but who knows if that pic is even a WV wheel, says it is but who knows...

Was hoping someone had firsthand knowledge of this wheel on a 4x4...really wanting it with a set of dog dish hubcaps I have

**cwcarpenter98** · 08-31-2021, 10:26 AM

I'm pretty sure these are the series 62. Bought them used from a guy that went to 5 lug. They fit great over the squarebody disc brakes I have on my 63. It's 2wd, but aren't the 4x4 brakes the same diameter rotor and same caliper?

cadillac_al · 08-31-2021, 05:24 PM

So WV makes a 15" steel wheel that looks exactly like a stock Chevy wheel but won't fit on a stock Chevy truck? I really don't think they would be that stupid but you have to go by what the salesman says. He is supposed to know. I think I would call WV and get a 2nd opinion from a different person; maybe ask for the most experienced guy in the building.

ky-donzi · 08-31-2021, 07:00 PM

After this post I’ve been digging some more, a couple of purchasers on summits website said indeed they DO NOT FIT k10s. Seems crazy that they don’t, but that’s what I’m finding...has to do with back spacing and the calipers.

Apparently CUCV wheels have a very shallow backspace

Mav · 08-29-2023, 04:32 AM

Had decided on 15x7 62 series wheels for 70 K10 (drum brakes), after reading this thread am wondering if they will fit? 4.25 backspace will be close, but thought they would clear, anyone running them? thanks rg

cadillac_al · 08-29-2023, 08:14 AM

What good is a Chevy replica wheel that doesn't fit a Chevy truck? This makes no sense to me.

Mav · 08-29-2023, 12:18 PM

I called Coker, I can order 1 and do a "trial fit", if it doesnt work they will take it back and pay freight, guess thats the best I can do. No answer why backspace has to be 4.25 on 7 & 8 inch wheels.

Mav · 08-31-2023, 07:49 PM

I dismounted tire and put wheel w/3.75 backspace on front of 70 K10. 4 inch would barely fit but not 4.25. Have been back and forth with Summit Racing and they bend over backwards to help, but havent answered why only the 15x6 is 3.75 bs. Guess if I had designed it I would keep it a secret too...

**HeloCrewChief** · 09-01-2023, 10:34 AM

Mine hit the tie rod ends. Sold them to someone with a 2 wheels drive and bought real CUCV wheels

Mav · 09-01-2023, 11:50 AM

Thanks, am sure same thing would happen on mine.

Mav · 10-20-2023, 10:12 AM

Wanted to know for sure, so ordered 1 15x8 series 62. 4.25 in. backspace is 1/2 inch too much. Was considering 31 series chrome rallys (4 in.bs) but know now they wont fit either. When WV quit custom backspacing they eliminated fit for 4x4s. Thinking I will go with MT classic 3 w/ 3.6 bs

**HeloCrewChief** · 10-20-2023, 09:31 PM

Yes, I learned that lesson the hard way as well. Do they not do the custom backspacing for extra money anymore?

Mav · 10-20-2023, 09:34 PM

The answer I get is no, they wont.

**HeloCrewChief** · 10-21-2023, 07:56 AM

Quote:

Originally Posted by Mav

The answer I get is no, they wont.

That’s pretty crazy. I’ve ordered several sets of series 62 wheels from them over the years and you always have to have a custom backspace done if you want them to fit whatever vehicle you are working on correctly. They will be losing a bunch of business I imagine.

Mav · 10-21-2023, 07:39 PM

Powdercoating is no longer an option either, oh well...since I have about decided on the MT classic 3s, which come with 4 closed center caps, does anyone know if the center can be knocked out for manual hubs, or do you have to buy 2 open caps? thanks

Shifty One · 10-24-2023, 05:42 PM

I have the 8-lug version (16x8) on my 87 V20, and it all fits just fine.

Mav · 10-24-2023, 06:00 PM

My 70 K10 has manual hubs...

08-30-2021, 09:14 PM	#1
ky-donzi Registered User Join Date: Jun 2012 Location: madisonville ky Posts: 313	Wheel vintiques 62 Has anyone used these? I was going to order a set and the tech from wheel vintiques said he didn’t think they would clear the caliper. There is a pic on summits website with a k5 using them https://www.summitracing.com/parts/wvi-62-5806044 __________________ 61 GMC 4x4 1-ton flatbed 4bt cummins, ranger od, sm465, np 205, d60F, d70R 4.11 10,000 ramsey PTO winch.... SOLD 73 k5 gm crate 350-265 / sm465 / np205 3.73 posi

08-30-2021, 09:35 PM	#2
cadillac_al Registered User Join Date: Oct 2013 Location: Maine Posts: 2,375	Re: Wheel vintiques 62 I can't imagine why they wouldn't clear the calipers. They look exactly like stock only a couple inches wider. __________________ 76 Chevy K20 76 GMC K15 77 Chevy C10 77 Chevy K10

08-31-2021, 08:07 AM	#3
ky-donzi Registered User Join Date: Jun 2012 Location: madisonville ky Posts: 313	Re: Wheel vintiques 62 Wheel tech at wheel vintique said because of the “drop down” the part of the wheel that drops down for tire mounting. Summit shows a pic of the wheel on a 4x4 k5, but who knows if that pic is even a WV wheel, says it is but who knows... Was hoping someone had firsthand knowledge of this wheel on a 4x4...really wanting it with a set of dog dish hubcaps I have __________________ 61 GMC 4x4 1-ton flatbed 4bt cummins, ranger od, sm465, np 205, d60F, d70R 4.11 10,000 ramsey PTO winch.... SOLD 73 k5 gm crate 350-265 / sm465 / np205 3.73 posi

08-31-2021, 10:02 AM	#4
ky-donzi Registered User Join Date: Jun 2012 Location: madisonville ky Posts: 313	Re: Wheel vintiques 62 Wheel tech at wheel vintique said because of the “drop down” the part of the wheel that drops down for tire mounting. Summit shows a pic of the wheel on a 4x4 k5, but who knows if that pic is even a WV wheel, says it is but who knows... Was hoping someone had firsthand knowledge of this wheel on a 4x4...really wanting it with a set of dog dish hubcaps I have __________________ 61 GMC 4x4 1-ton flatbed 4bt cummins, ranger od, sm465, np 205, d60F, d70R 4.11 10,000 ramsey PTO winch.... SOLD 73 k5 gm crate 350-265 / sm465 / np205 3.73 posi

08-31-2021, 10:26 AM	#5
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,488	Re: Wheel vintiques 62 I'm pretty sure these are the series 62. Bought them used from a guy that went to 5 lug. They fit great over the squarebody disc brakes I have on my 63. It's 2wd, but aren't the 4x4 brakes the same diameter rotor and same caliper? Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

08-31-2021, 05:24 PM	#6
cadillac_al Registered User Join Date: Oct 2013 Location: Maine Posts: 2,375	Re: Wheel vintiques 62 So WV makes a 15" steel wheel that looks exactly like a stock Chevy wheel but won't fit on a stock Chevy truck? I really don't think they would be that stupid but you have to go by what the salesman says. He is supposed to know. I think I would call WV and get a 2nd opinion from a different person; maybe ask for the most experienced guy in the building. __________________ 76 Chevy K20 76 GMC K15 77 Chevy C10 77 Chevy K10

08-31-2021, 07:00 PM	#7
ky-donzi Registered User Join Date: Jun 2012 Location: madisonville ky Posts: 313	Re: Wheel vintiques 62 After this post I’ve been digging some more, a couple of purchasers on summits website said indeed they DO NOT FIT k10s. Seems crazy that they don’t, but that’s what I’m finding...has to do with back spacing and the calipers. Apparently CUCV wheels have a very shallow backspace __________________ 61 GMC 4x4 1-ton flatbed 4bt cummins, ranger od, sm465, np 205, d60F, d70R 4.11 10,000 ramsey PTO winch.... SOLD 73 k5 gm crate 350-265 / sm465 / np205 3.73 posi

08-29-2023, 04:32 AM	#8
Mav Registered User Join Date: Jun 2016 Location: Richland Or. Posts: 115	Re: Wheel vintiques 62 Had decided on 15x7 62 series wheels for 70 K10 (drum brakes), after reading this thread am wondering if they will fit? 4.25 backspace will be close, but thought they would clear, anyone running them? thanks rg

08-29-2023, 08:14 AM	#9
cadillac_al Registered User Join Date: Oct 2013 Location: Maine Posts: 2,375	Re: Wheel vintiques 62 What good is a Chevy replica wheel that doesn't fit a Chevy truck? This makes no sense to me. __________________ 76 Chevy K20 76 GMC K15 77 Chevy C10 77 Chevy K10

08-29-2023, 12:18 PM	#10
Mav Registered User Join Date: Jun 2016 Location: Richland Or. Posts: 115	Re: Wheel vintiques 62 I called Coker, I can order 1 and do a "trial fit", if it doesnt work they will take it back and pay freight, guess thats the best I can do. No answer why backspace has to be 4.25 on 7 & 8 inch wheels.

08-31-2023, 07:49 PM	#11
Mav Registered User Join Date: Jun 2016 Location: Richland Or. Posts: 115	Re: Wheel vintiques 62 I dismounted tire and put wheel w/3.75 backspace on front of 70 K10. 4 inch would barely fit but not 4.25. Have been back and forth with Summit Racing and they bend over backwards to help, but havent answered why only the 15x6 is 3.75 bs. Guess if I had designed it I would keep it a secret too...

09-01-2023, 10:34 AM	#12
HeloCrewChief Senior Member Join Date: Aug 2010 Location: North Alabama Posts: 1,056	Re: Wheel vintiques 62 Mine hit the tie rod ends. Sold them to someone with a 2 wheels drive and bought real CUCV wheels __________________ 1970 C10 to K20 conversion 1974 GMC Jimmy 1968 50th Anniversary Short Bed 1968 Chevelle 1964 Comet Caliente 1990 W250 Cummins

09-01-2023, 11:50 AM	#13
Mav Registered User Join Date: Jun 2016 Location: Richland Or. Posts: 115	Re: Wheel vintiques 62 Thanks, am sure same thing would happen on mine.

10-20-2023, 10:12 AM	#14
Mav Registered User Join Date: Jun 2016 Location: Richland Or. Posts: 115	Re: Wheel vintiques 62 Wanted to know for sure, so ordered 1 15x8 series 62. 4.25 in. backspace is 1/2 inch too much. Was considering 31 series chrome rallys (4 in.bs) but know now they wont fit either. When WV quit custom backspacing they eliminated fit for 4x4s. Thinking I will go with MT classic 3 w/ 3.6 bs

10-20-2023, 09:31 PM	#15
HeloCrewChief Senior Member Join Date: Aug 2010 Location: North Alabama Posts: 1,056	Re: Wheel vintiques 62 Yes, I learned that lesson the hard way as well. Do they not do the custom backspacing for extra money anymore? __________________ 1970 C10 to K20 conversion 1974 GMC Jimmy 1968 50th Anniversary Short Bed 1968 Chevelle 1964 Comet Caliente 1990 W250 Cummins



Register or Log In To remove these advertisements.

10-20-2023, 09:34 PM	#16
Mav Registered User Join Date: Jun 2016 Location: Richland Or. Posts: 115	Re: Wheel vintiques 62 The answer I get is no, they wont.

10-21-2023, 07:39 PM	#18
Mav Registered User Join Date: Jun 2016 Location: Richland Or. Posts: 115	Re: Wheel vintiques 62 Powdercoating is no longer an option either, oh well...since I have about decided on the MT classic 3s, which come with 4 closed center caps, does anyone know if the center can be knocked out for manual hubs, or do you have to buy 2 open caps? thanks

10-24-2023, 05:42 PM	#19
Shifty One Registered User Join Date: Dec 2014 Location: Tucson, AZ Posts: 742	Re: Wheel vintiques 62 I have the 8-lug version (16x8) on my 87 V20, and it all fits just fine. __________________ 1987 V20 farm-hand rescue 1998 C2500 lot-rot rescue

10-24-2023, 06:00 PM	#20
Mav Registered User Join Date: Jun 2016 Location: Richland Or. Posts: 115	Re: Wheel vintiques 62 My 70 K10 has manual hubs...

Register or Log In To remove these advertisements.