The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-28-2021, 10:40 AM   #376
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

I finally got around to modifying the OEM tire bracket so I could fit a 35" (34.6") fullsize spare. If you look closely at this picture, you can see how I made a 5/8" plate (spacer) with two holes to insert bolts through the OEM adjustable slot and 1 squared hole for the OEM carriage bolt to hook up the wheel. I moved this square hole mounting point up one inch and over two inches.



And on the other side, the finished product. There is literally no room to spare, but it absolutely fits. Snug as a bug.


Last edited by buffydores; 10-08-2021 at 09:35 AM.
buffydores is offline   Reply With Quote
Old 09-28-2021, 10:41 AM   #377
OutlawDrifter
Registered User
 
Join Date: Aug 2012
Location: Northeast KS
Posts: 1,789
Re: 1978 Russet Metallic 4x4

Wow that is tight! Are you going to have a cover made to match the interior?
__________________
1999 GMC Suburban K2500 SLT, 454/4L80E
1991 Z/28, 6.0L/T56
1949 GMC 250, S10 Frame, 6.0L/4L80E

Instagram @aceshighspeedshop
OutlawDrifter is offline   Reply With Quote
Old 09-28-2021, 10:43 AM   #378
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by OutlawDrifter View Post
Wow that is tight! Are you going to have a cover made to match the interior?
Nope. I like the bare look. Back in the day, it sported the factory cover, but I never really liked it.
buffydores is offline   Reply With Quote
Old 09-28-2021, 02:50 PM   #379
wazzabie
Registered User
 
Join Date: Dec 2011
Location: WA
Posts: 378
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by buffydores View Post
I finally got around to modifying the OEM tire bracket so I could fit a 35" (34.6") fullsize spare. If you look closely at this picture, you can see how I made a 1/2" plate (spacer) with two holes to insert bolts through the OEM adjustable slot and 1 squared hole for the OEM carriage bolt to hook up the wheel. I moved this square hole mounting point up one inch and over two inches.



And on the other side, the finished product. There is literally no room to spare, but it absolutely fits. Snug as a bug.

It is difficult to see. Did you have to cut or drill your original tire mount? Is your solution entirely bolt on?
wazzabie is offline   Reply With Quote
Old 09-28-2021, 03:07 PM   #380
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by wazzabie View Post
It is difficult to see. Did you have to cut or drill your original tire mount? Is your solution entirely bolt on?
Completely bolt on. Imagine a triangular piece of 5/8 inch plate with three holes sandwiched between the original bracket and the wheel. Two holes to the original bracket. One hole for the carriage bolt attached to the wheel.
buffydores is offline   Reply With Quote
Old 09-28-2021, 05:57 PM   #381
wazzabie
Registered User
 
Join Date: Dec 2011
Location: WA
Posts: 378
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by buffydores View Post
Completely bolt on. Imagine a triangular piece of 5/8 inch plate with three holes sandwiched between the original bracket and the wheel. Two holes to the original bracket. One hole for the carriage bolt attached to the wheel.
Also btw - Did you paint your spare rim? The wheel looks perfect.
wazzabie is offline   Reply With Quote
Old 09-28-2021, 06:01 PM   #382
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by wazzabie View Post
Also btw - Did you paint your spare rim? The wheel looks perfect.
That's a factory spare punched out to 16" by Stockton Wheel. Just painted white. Looks right.
buffydores is offline   Reply With Quote
Old 09-28-2021, 07:59 PM   #383
wazzabie
Registered User
 
Join Date: Dec 2011
Location: WA
Posts: 378
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by buffydores View Post
That's a factory spare punched out to 16" by Stockton Wheel. Just painted white. Looks right.
Interesting. I didn't know they can go from 15in to 16in. Why did you punch them out?

My white rims look terrible as the paint has gone bad. They need to be sand blasted and maybe power coated. I'm not sure what is best.
wazzabie is offline   Reply With Quote
Old 09-28-2021, 08:28 PM   #384
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by wazzabie View Post
Interesting. I didn't know they can go from 15in to 16in. Why did you punch them out?.
More tire options. I recommend blast and rattle can. Easy touch ups.

Last edited by buffydores; 09-28-2021 at 09:10 PM.
buffydores is offline   Reply With Quote
Old 10-07-2021, 09:11 PM   #385
zellway
Registered User
 
zellway's Avatar
 
Join Date: Dec 2009
Location: Arizona City, AZ
Posts: 747
Re: 1978 Russet Metallic 4x4

I didn’t know that size tire would fit inside. Looks great! The smell of new rubber makes for a added bonus. I might need to look into making one for mine. The AZ sun is not kind on rubber so I would rather it be inside like you have.
__________________
-----------------------------------------------------------
Erik
My 69 suburban http://67-72chevytrucks.com/vboard/s...d.php?t=530626
1970 C10 step Project Jiminy http://67-72chevytrucks.com/vboard/s...d.php?t=682647
RUST!? Thats just mother natures way of telling all of us.....MINE!!!!
zellway is offline   Reply With Quote
Old 10-07-2021, 10:52 PM   #386
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by zellway View Post
I didn’t know that size tire would fit inside. Looks great! The smell of new rubber makes for a added bonus. I might need to look into making one for mine. The AZ sun is not kind on rubber so I would rather it be inside like you have.
Amazing what we can figure out with a tape measure. Good luck.
buffydores is offline   Reply With Quote
Old 01-13-2022, 11:54 AM   #387
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: 1978 Russet Metallic 4x4

Cameron,

Saw your Blazer the other day at Southern Longview Automotive, I noticed something fuzzy in the vent widow? I am guess you came up with this to cut down on wind noise? Or I am off base?
Attached Images
 
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square
aggie91 is offline   Reply With Quote
Old 01-13-2022, 11:56 AM   #388
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

LOL. Yep. I had Mark down at Action Seat Cover make those for me. They're sheepskin with strong magnets. I lay them in A-pillars when I'm on Interstate to cut down on the road noise. They're very effective and very tacky.

I have the Mega Western Roadtrip coming up this summer. I'm doing everything I can to improve comfort. We have two squarebodies running up to Ennis, MT (fishing), then down to Durango, CO(offroading) and then back to East Texas. We're called the Senseless 6.

Last edited by buffydores; 01-13-2022 at 12:03 PM.
buffydores is offline   Reply With Quote
Old 01-13-2022, 12:53 PM   #389
wazzabie
Registered User
 
Join Date: Dec 2011
Location: WA
Posts: 378
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by aggie91 View Post
Cameron,

Saw your Blazer the other day at Southern Longview Automotive, I noticed something fuzzy in the vent widow? I am guess you came up with this to cut down on wind noise? Or I am off base?
Did you put in new window seals for the vent window?
wazzabie is offline   Reply With Quote
Old 01-13-2022, 03:22 PM   #390
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

It's newish. The seal is fine there. It's just the wind rushing by the gap of the door. I run 85 mph on Interstate, so there's only so much you can do.
buffydores is offline   Reply With Quote
Old 01-18-2022, 03:54 AM   #391
LT7A
Registered User
 
Join Date: Oct 2015
Location: PNW
Posts: 3,627
Re: 1978 Russet Metallic 4x4

Haha, the fuzzies are great! And those mufflers! Cut those in half and you've got four Quonset huts. Never seen such a thing. The bluing on them concerns me. That seems like a lot of heat build up and therefore back pressure. Did you notice a performance difference when you had them installed? Truck looks great, and always so clean. I really like the effort you put into drivability even if it requires big squirrel tails to be mounted on the A pillars. Good updates.

Edit: Just thought of something. Do you have both rubber strips for your doors? There is the standard inner seal, and then there is another seal that attaches to the door itself. I believe that it was added for high optioned trucks.
LT7A is offline   Reply With Quote
Old 01-18-2022, 06:39 AM   #392
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Quote:
Originally Posted by LT7A View Post
Haha, the fuzzies are great! And those mufflers! Cut those in half and you've got four Quonset huts. Never seen such a thing. The bluing on them concerns me. That seems like a lot of heat build up and therefore back pressure. Did you notice a performance difference when you had them installed? Truck looks great, and always so clean. I really like the effort you put into drivability even if it requires big squirrel tails to be mounted on the A pillars. Good updates.

Edit: Just thought of something. Do you have both rubber strips for your doors? There is the standard inner seal, and then there is another seal that attaches to the door itself. I believe that it was added for high optioned trucks.
The mufflers came out of the box blued. They’re stainless and that’s from the welding. I do have both seals. I bet if this was a true frame off and everything was squared up, it would be a little better. I can’t tell any difference in performance with the mufflers. My butt-o-meter still indicates spunky. The squirrels come off if I’m just running around in town. I wanted it to be super easy on and off. I really appreciate everyone’s continued interest in something that means a lot to me. Cheers.
Posted via Mobile Device
buffydores is offline   Reply With Quote
Old 01-24-2022, 12:45 PM   #393
LT7A
Registered User
 
Join Date: Oct 2015
Location: PNW
Posts: 3,627
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by buffydores View Post
The mufflers came out of the box blued. They’re stainless and that’s from the welding. I do have both seals. I bet if this was a true frame off and everything was squared up, it would be a little better. I can’t tell any difference in performance with the mufflers. My butt-o-meter still indicates spunky. The squirrels come off if I’m just running around in town. I wanted it to be super easy on and off. I really appreciate everyone’s continued interest in something that means a lot to me. Cheers.
Posted via Mobile Device
Copy that, it took a lot of heat to make them blue. Glad to find out that occurred during the manufacturing process.
LT7A is offline   Reply With Quote
Old 03-16-2022, 09:43 PM   #394
HOTFUN
Registered User
 
HOTFUN's Avatar
 
Join Date: Jan 2001
Location: Lincoln, Nebraska
Posts: 2,145
Re: 1978 Russet Metallic 4x4

I have been going back to this post for years looking at this Russet Poly paint. I am frame off restoring a loaded original 1973 GMC Sierra Grande 4x4 short box in the deluxe two tone russet or red body with frost white. I have a perfect bucket seat interior in charcoal with black dash. I'm between your Russet Poly main color and cardinal red from 1973. Im leaning to russet/white. Thanks for the great updates.
__________________
'66 CST BBW swb fleet 327 fac ac
'67 CST 4x4 swb 327 stepside project
'72 Cheyenne K20 50k original
'72 Cheyenne Super K20 project
'73 Sierra swb 4x4 frame off in paint stage
'74 Cheyenne Super swb w/16k actual
'71 & 72 Cheyenne K10 4x4 swb's
'70 426 HEMICUDA conv SHAKER 4 sp Dana 60
'60 Impala conv 327 PG fac ac loaded 3rd owner
'72 GMC K2500 4x4
'59 Apache CST BBW fleetside swb 283
'73 ElCamino SS LS1 T56 true SS bucket tach
'76 ElCamino SS 52k survivor
'87 Grand National 41k True 2nd to last built in 1987.
'86 K30 454 SRW fleetside CA since new
'88 Trans Am GTA 39k bought new
2018 DEMON plum crazy @ 840HP! "Need for speed"
HOTFUN is offline   Reply With Quote
Old 03-17-2022, 08:35 AM   #395
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Quote:
Originally Posted by HOTFUN View Post
I have been going back to this post for years looking at this Russet Poly paint. I am frame off restoring a loaded original 1973 GMC Sierra Grande 4x4 short box in the deluxe two tone russet or red body with frost white. I have a perfect bucket seat interior in charcoal with black dash. I'm between your Russet Poly main color and cardinal red from 1973. Im leaning to russet/white. Thanks for the great updates.
You’re quite welcome. Unsolicited, the Cardinal Red and white would probably contrast with the charcoal better than orange and white. That’s coming from a guy that loves his orange.
Posted via Mobile Device
buffydores is offline   Reply With Quote
Old 04-20-2023, 03:45 PM   #396
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

A few updates folks. Me and some runnin' buddies took the Blazer and my buddy's square 'Burb' on a big western loop last summer. We drove from East Texas over to New Mexico and then up to Montana for some flyfishing. The hipsters from Cali have invaded my favorite watering hole in Ennis, MT. We headed south through Idaho and Utah and then back down to Durango for some trail running on the Alpine Loop. Good times. We've already planned the next adventure in 2025.

The El Western, Ennis, MT


Morning in Glendo, WY


Engineer Pass in the San Juans 13K'

Last edited by buffydores; 04-20-2023 at 03:52 PM.
buffydores is offline   Reply With Quote
Old 04-20-2023, 03:51 PM   #397
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

The Blazer did fantastic on its longest journey thus far ~3,600 miles. The only broken part was the foot switch for the brights. The trip did highlight two weaknesses: The inaccurate speedo and the weak AC. Finally got around to addressing both with the good folks at Southern Longview Automotive. I can't oversale these upgrades. I finally have a legit AC.

You can see the Dakota Digital RTX instruments with GPS speedo and the Vintage Air Controls


The cleaner engine compartment.
buffydores is offline   Reply With Quote
Old 04-20-2023, 04:37 PM   #398
HOTFUN
Registered User
 
HOTFUN's Avatar
 
Join Date: Jan 2001
Location: Lincoln, Nebraska
Posts: 2,145
Re: 1978 Russet Metallic 4x4

Im getting close and I love orange so its going to Russet poly and frost white deluxe tutone. Edged and going on restored frame next week. 1973 GMC K15 short fleet
Attached Images
   
__________________
'66 CST BBW swb fleet 327 fac ac
'67 CST 4x4 swb 327 stepside project
'72 Cheyenne K20 50k original
'72 Cheyenne Super K20 project
'73 Sierra swb 4x4 frame off in paint stage
'74 Cheyenne Super swb w/16k actual
'71 & 72 Cheyenne K10 4x4 swb's
'70 426 HEMICUDA conv SHAKER 4 sp Dana 60
'60 Impala conv 327 PG fac ac loaded 3rd owner
'72 GMC K2500 4x4
'59 Apache CST BBW fleetside swb 283
'73 ElCamino SS LS1 T56 true SS bucket tach
'76 ElCamino SS 52k survivor
'87 Grand National 41k True 2nd to last built in 1987.
'86 K30 454 SRW fleetside CA since new
'88 Trans Am GTA 39k bought new
2018 DEMON plum crazy @ 840HP! "Need for speed"
HOTFUN is offline   Reply With Quote
Old 04-20-2023, 05:03 PM   #399
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by HOTFUN View Post
Im getting close and I love orange so its going to Russet poly and frost white deluxe tutone. Edged and going on restored frame next week. 1973 GMC K15 short fleet
It's a great combo.
buffydores is offline   Reply With Quote
Old 11-03-2023, 06:32 PM   #400
phillipm
Registered User
 
Join Date: Oct 2014
Location: Scottsdale, AZ
Posts: 465
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by buffydores View Post
The Blazer did fantastic on its longest journey thus far ~3,600 miles. The only broken part was the foot switch for the brights. The trip did highlight two weaknesses: The inaccurate speedo and the weak AC. Finally got around to addressing both with the good folks at Southern Longview Automotive. I can't oversale these upgrades. I finally have a legit AC.

You can see the Dakota Digital RTX instruments with GPS speedo and the Vintage Air Controls


The cleaner engine compartment.
You finally pulled the trigger on the Vintage Air! Too bad you were a little before the new Gen V with the bigger blower however I'm sure it's still better than before either way. Looking good man. Lookin good.
phillipm is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:16 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com