For anyone looking to Go with Holley Sniper EFI - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**biketopia** · 10-07-2021, 06:37 AM

IF you're on a facebook there a few good sniper pages too. Don't be scared when you see "everyone" has questions and concerns or issues. They are tech and help pages, so that's the type of questions that get asked. Good info on tuning, set up, etc, Holley is an active member of at least of them too. EFI systems pro site has some good write ups as well.

**biketopia** · 10-07-2021, 02:59 PM

You will also most likely need a throttle cable bracket, either lokar or FAST both make one that fits well.

**70STOVEBOLT** · 10-07-2021, 04:12 PM

Will the EFI unit bolt onto a spreadbore intake without an adapter? Holley recommends a sealing plate.

jimijam00 · 10-07-2021, 04:22 PM

The Snipers are dual pattern, so it will go on without an adapter/spacer, though you should make sure the blades aren't hitting your intake, which would then need a spacer for sure.

The sealing plate recommendation comes after some complained of a whistling sound. Some like the whisle. Some have such loud beasts under the hood, they cannot hear the whistle.

**70STOVEBOLT** · 10-07-2021, 04:27 PM

Quote:

Originally Posted by jimijam00

The Snipers are dual pattern, so it will go on without an adapter/spacer, though you should make sure the blades aren't hitting your intake, which would then need a spacer for sure.

The sealing plate recommendation comes after some complained of a whistling sound. Some like the whisle. Some have such loud beasts under the hood, they cannot hear the whistle.

Ah, ok.

jimijam00 · 10-07-2021, 04:32 PM

This will do the trick and help keep heat away from that little computer in the TB. As I see it, keeping heat away from the computer can only be a good thing.

10-07-2021, 06:37 AM	#26
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,110	Re: For anyone looking to Go with Holley Sniper EFI IF you're on a facebook there a few good sniper pages too. Don't be scared when you see "everyone" has questions and concerns or issues. They are tech and help pages, so that's the type of questions that get asked. Good info on tuning, set up, etc, Holley is an active member of at least of them too. EFI systems pro site has some good write ups as well. __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350

10-07-2021, 02:59 PM	#27
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,110	Re: For anyone looking to Go with Holley Sniper EFI You will also most likely need a throttle cable bracket, either lokar or FAST both make one that fits well. __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350

10-07-2021, 04:12 PM	#28
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,455	Re: For anyone looking to Go with Holley Sniper EFI Will the EFI unit bolt onto a spreadbore intake without an adapter? Holley recommends a sealing plate. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

10-07-2021, 04:22 PM	#29
jimijam00 Registered User Join Date: Apr 2009 Location: PNW Posts: 553	Re: For anyone looking to Go with Holley Sniper EFI The Snipers are dual pattern, so it will go on without an adapter/spacer, though you should make sure the blades aren't hitting your intake, which would then need a spacer for sure. The sealing plate recommendation comes after some complained of a whistling sound. Some like the whisle. Some have such loud beasts under the hood, they cannot hear the whistle.

10-07-2021, 04:32 PM	#31
jimijam00 Registered User Join Date: Apr 2009 Location: PNW Posts: 553	Re: For anyone looking to Go with Holley Sniper EFI This will do the trick and help keep heat away from that little computer in the TB. As I see it, keeping heat away from the computer can only be a good thing.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.