Heater core brackets? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevemall · 07-21-2004, 01:53 PM

Need some bad!

A few 72's · 07-21-2004, 03:23 PM

I made some from 1/8" or so rod from Lowes. Just bent to shape of core and rounded ends back in to from a loop to hold screw. I've had them in for close to a year with out any problems. Sorry but did not have the camera at the time to take pic's.

67chevemall · 07-21-2004, 03:50 PM

Fab eh!

I could but?

Are the ends flat with a hole for screws?
I guess this would press the backets around the core
and fasten to the plastic housing?

A few 72's · 07-22-2004, 10:18 AM

I just made a loop on each end for the screw to go into. Screw goes through the box and into the bracket on each end. Just get the loop small so that the screw will grip. I used some new small sheet metal screws. If you had a press I guess you could flatten the end of the rod and drill a hole like the org. I did a small drawing of how I did the loop.

67chevemall · 07-22-2004, 10:26 AM

Thanks alot!
If nobody has any in the next little while I'll go that route!
Cheers

Anybody have some for sale!??????

stelth2002 · 07-22-2004, 12:14 PM

I think i have some. PM sent

07-21-2004, 01:53 PM	#1
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Heater core brackets? Need some bad! __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD Last edited by 67chevemall; 07-09-2010 at 02:29 PM.

07-21-2004, 03:23 PM	#2
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	I made some from 1/8" or so rod from Lowes. Just bent to shape of core and rounded ends back in to from a loop to hold screw. I've had them in for close to a year with out any problems. Sorry but did not have the camera at the time to take pic's. __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

07-21-2004, 03:50 PM	#3
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Fab eh! I could but? Are the ends flat with a hole for screws? I guess this would press the backets around the core and fasten to the plastic housing? __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

07-22-2004, 10:18 AM	#4
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	I just made a loop on each end for the screw to go into. Screw goes through the box and into the bracket on each end. Just get the loop small so that the screw will grip. I used some new small sheet metal screws. If you had a press I guess you could flatten the end of the rod and drill a hole like the org. I did a small drawing of how I did the loop. Attached Images __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

07-22-2004, 10:26 AM	#5
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Thanks alot! If nobody has any in the next little while I'll go that route! Cheers Anybody have some for sale!?????? __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

07-22-2004, 12:14 PM	#6
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	I think i have some. PM sent __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.