The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-28-2021, 11:26 AM   #1
MDFarms
Registered User
 
Join Date: Apr 2021
Location: Mount Pleasant, Michigan
Posts: 477
Best aftermarket bumpers

When purchasing rear bumpers who has the best quality on the sport style bumper with mounting kit?

Anyone with NOS Rear Sport Bumper? Its been a never ending NOS spending spree so why stop now.
MDFarms is offline   Reply With Quote
Old 12-28-2021, 11:43 AM   #2
sick472
Registered User
 
sick472's Avatar
 
Join Date: Jul 2015
Location: Sedalia Mo.
Posts: 1,131
Re: Best aftermarket bumpers

I bought my rear sport bumper and front bumper from GMC Pauls and used the original mounting brackets. They looked and fit very well. I'd give them a 8 out of ten where a NOS bumper would be a 10 and a quality re-chrome on a original bumper would be a 9 or better. I made my purchase of these bumpers about 2 years ago.
__________________
He who is without oil shall throw the first rod. Compressions 8.7:1

1972 C10
1976 C10 (parts truck)
1985 K20
sick472 is offline   Reply With Quote
Old 12-28-2021, 11:48 AM   #3
Jason Banks
Senior Member
 
Jason Banks's Avatar
 
Join Date: Dec 1999
Location: TX
Posts: 1,624
Re: Best aftermarket bumpers

The refurbished bumpers from goodmark are supposed to be the best.

Part numbers - Rear - GMK4143800674A and 67-70 Front GMK4143000672A

I believe having the 'A' on the end of the part number is the key.
Jason Banks is offline   Reply With Quote
Old 12-28-2021, 12:02 PM   #4
MDFarms
Registered User
 
Join Date: Apr 2021
Location: Mount Pleasant, Michigan
Posts: 477
Re: Best aftermarket bumpers

Quote:
Originally Posted by Jason Banks View Post
The refurbished bumpers from goodmark are supposed to be the best.

Part numbers - Rear - GMK4143800674A and 67-70 Front GMK4143000672A

I believe having the 'A' on the end of the part number is the key.
Look nice but premiums out of stock it seems. Put on a reminder email list for availability.
MDFarms is offline   Reply With Quote
Old 12-28-2021, 12:14 PM   #5
Jason Banks
Senior Member
 
Jason Banks's Avatar
 
Join Date: Dec 1999
Location: TX
Posts: 1,624
Re: Best aftermarket bumpers

Quote:
Originally Posted by MDFarms View Post
Look nice but premiums out of stock it seems. Put on a reminder email list for availability.
I would call GMCPauls and see if these are the ones they stock.

I have them and they sure are nice.
Jason Banks is offline   Reply With Quote
Old 12-28-2021, 12:41 PM   #6
MDFarms
Registered User
 
Join Date: Apr 2021
Location: Mount Pleasant, Michigan
Posts: 477
Re: Best aftermarket bumpers

Quote:
Originally Posted by Jason Banks View Post
I would call GMCPauls and see if these are the ones they stock.

I have them and they sure are nice.
Will do, THX
MDFarms is offline   Reply With Quote
Old 12-28-2021, 08:38 PM   #7
70STOVEBOLT
Senior Member
 
70STOVEBOLT's Avatar
 
Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,422
Re: Best aftermarket bumpers

Quote:
Originally Posted by Jason Banks View Post
The refurbished bumpers from goodmark are supposed to be the best.

Part numbers - Rear - GMK4143800674A and 67-70 Front GMK4143000672A

I believe having the 'A' on the end of the part number is the key.
This is what I have on the rear of my truck. It is excellent quality.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast"
200,000 Mile Club
Disc Brake Club

Owner installed options:
Front Sway Bar
Power Steering
Power Brakes
Cigar Lighter
Courtesy Lights
Deluxe Side Markers
Wiper Delay
Sliding Rear Window
Power Windows
Power Locks
Sniper EFI

2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear
70STOVEBOLT is offline   Reply With Quote
Old 01-05-2022, 10:43 AM   #8
DaHos
Senior Member
 
DaHos's Avatar
 
Join Date: Sep 2011
Location: Owosso, Michigan
Posts: 2,860
Re: Best aftermarket bumpers

Don't confuse repo with re-chrome......

Goodmark re-chrome here: http://www.rechromebumper.com/index.asp
__________________
1967 C10 SWB
Owner - Rustbelt Restorations
DaHos is offline   Reply With Quote
Old 12-05-2024, 11:42 AM   #9
1970cstblazer
All stock and staying that way
 
1970cstblazer's Avatar
 
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,845
Thumbs down Re: Best aftermarket bumpers

Quote:
Originally Posted by Jason Banks View Post
The refurbished bumpers from Goodmark are supposed to be the best.

Part numbers - Rear - GMK4143800674A and 67-70 Front GMK4143000672A

I believe having the 'A' on the end of the part number is the key.
These are the ones to have. Unfortunately, they have been out of stock EVERYWHERE for over a year. Doesn't appear Goodmark is doing these anymore.

It's a shame, because the alternatives are not great. AMD front is OK. AMD rear not so much.
__________________
1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion..

1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor...

2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2...

2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels
1970cstblazer is offline   Reply With Quote
Old 12-06-2024, 12:03 AM   #10
71CHEVYSHORTBED402
Senior Member
 
71CHEVYSHORTBED402's Avatar
 
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,325
Re: Best aftermarket bumpers

Quote:
Originally Posted by Jason Banks View Post
The refurbished bumpers from goodmark are supposed to be the best.

Part numbers - Rear - GMK4143800674A and 67-70 Front GMK4143000672A

I believe having the 'A' on the end of the part number is the key.
I bought one, supposedly. It was a rear bumper, and it was beautiful. Don't know if it fit, and didn't care, because its part number was stamped on its lower exterior. Could not believe it, Y, Y, Y. I ended up having the original reconditioned.

As for the OP's mounting kit, you don't necessarily go by what the seller recommends. Measure the frame rail bolt pattern for brackets. I'm aware of 5", 5.3", and 7.1" bolt patterns. That's three different inner brackets, and two different outer brackets. If common 7.1" (longer inner brackets) or 5" (shorter inners), then the outer brackets are the same, and the sets are reproduced.

You don't have to worry about 5.3", likely, they're not reproduced.

Sounds like you're building a nice truck. NOS rear? Hmm, don't hold your breath, but you never know. Seems I had a search on ebay for YEARS, nothing. Probably run I don't know, too close to 2K or so, perhaps, if you can find one. If you have a good original, for reconditioning, 1K or so gets it done. Sometimes it's a BIG hassle, ask me how I know. That's just California being California, Fresno to be exact. They tried stealing my front bumper, bastads, and they took forever. There seems to be a nice reputable place in Utah.
__________________
Tony
71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

Last edited by 71CHEVYSHORTBED402; 12-06-2024 at 12:14 AM.
71CHEVYSHORTBED402 is offline   Reply With Quote
Old 12-06-2024, 12:35 PM   #11
CAMAROBOY68SS
Senior Member

 
CAMAROBOY68SS's Avatar
 
Join Date: Apr 2022
Location: Hillsboro, Oregon
Posts: 496
Re: Best aftermarket bumpers

I bought mine from brothers on a sale, it was the "show chrome" option, its miles better than the repop chrome bumpers I had stuck on my 68 Camaro. So far its holding up really well.
__________________
The Twins:
1968 C10 SWB - Blue 327/5 Speed
1968 Camaro SS/RS - Blue 327/4speed

C10 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=833278

The "Others"
1933 Ford Pickup (Camaro in disguise)
2017 Camaro SS

Life long Chevy guy
CAMAROBOY68SS is offline   Reply With Quote
Old 12-06-2024, 11:02 PM   #12
dmjlambert
Senior Member
 
dmjlambert's Avatar
 
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,873
Re: Best aftermarket bumpers

Quote:
Originally Posted by MDFarms View Post
Anyone with NOS Rear Sport Bumper? Its been a never ending NOS spending spree so why stop now.
Having grown up in the 60s and 70s I observed that approximately 0% of these trucks had rear bumpers from the factory. I'm sure there were a few exceptionally rich people who would have special ordered their trucks with "sport" bumpers, but I don't know why because even 0% of the exceptionally rich would have been interested in a bumper they couldn't step on to get into the bed without their foot slipping and racking their nether regions. :-) I never saw a chrome sport bumper on a pickup truck until about 1978 or so when affluenza hit America, and it was a bizarre sight to see indeed. Around that time were the first trucks rolling off the line where the new owner would NOT help you bring home a refrigerator or washer from Sears or Wards nor help you move, because it might scratch the paint in the bed. The new era was both amusing and sad from my view.

In the time of our trucks and the first half of the square body era, they came with no bumper from the factory, and they had an under-body lighted license plate holder. Then at the dealer one end of the license plate holder was bent out of the way and a locally-made rear bumper deeply engraved with the dealer name and city was attached, and the truck was sold. The bumper on my 69 was made at D&D Bumperworks in Seguin, Texas (pronouced suh-geen). It would be interesting to see the numbers, but if I had to guess I would think sport bumpers may have come on 5,000 or less of the millions of trucks sold. NOS locally-made step bumper in silver paint with red-paint engraved dealer name would be a more likely find. My view was from Texas, so your view may vary.

United Pacific is pretty new in the sheet metal world, and I bought a chrome front bumper from them in 2021. It was inexpensive and is looking good on my otherwise rusty old truck even after a few years. If I were inclined to slip and rack my nether regions on the tailgate by using a slick rear bumper, I would probably buy one of theirs.


Last edited by dmjlambert; 12-06-2024 at 11:17 PM.
dmjlambert is offline   Reply With Quote
Old 12-06-2024, 11:27 PM   #13
Louisvillekytruck
Senior Member
 
Join Date: Jun 2019
Location: Louisville ky
Posts: 1,112
Re: Best aftermarket bumpers

Great information
Louisvillekytruck is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:29 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com