roll pan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jason kitchens · 01-21-2022, 01:53 PM

hello are there roll pans out there that i dont have to cut the sill to install on a 1968 c10 fleetside

**basketcase** · 01-21-2022, 04:48 PM

If they have a license pocket it will interfere with the sill and you will need to cut it for clearance. The ones without the license pocket will go right on with no cutting but then you have to decide where you are going to mount your plate. you could make your own license pocket lower in the pan to cleat the sill.

Tom

01-21-2022, 01:53 PM	#1
Jason kitchens Registered User Join Date: Mar 2019 Location: concord Posts: 46	roll pan hello are there roll pans out there that i dont have to cut the sill to install on a 1968 c10 fleetside

01-21-2022, 04:48 PM	#2
basketcase Senior Member Join Date: Oct 2001 Location: Edgerton OH USA Posts: 633	Re: roll pan If they have a license pocket it will interfere with the sill and you will need to cut it for clearance. The ones without the license pocket will go right on with no cutting but then you have to decide where you are going to mount your plate. you could make your own license pocket lower in the pan to cleat the sill. Tom __________________ '69 swb stepside in progress. '59 Corvette lifetime project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.