Turn signal cancel cam - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MikeB** · 03-15-2022, 11:52 AM

I'm just about to finish the rebuild on a 69 Chevy truck non-tilt column, and I'd like to replace the 30 year old turn signal cancel cam. The steering wheel is from a late 80s/ early 90s Chevy truck, but I can't remember if I used a 69 cam or one from a later model, or if it even makes a difference. Is it typical that the "lobes" aren't evenly spaced?

Thanks for your help.

**Palf70Step** · 03-15-2022, 12:43 PM

I have the 88-94 style truck wheel on my 70 and just used stock canceling thingie. Plugged the horn wire into the stock piece. Looks just like the piece you are showing, so I assume it is using stock cancel thingie.

**truckster** · 03-15-2022, 01:20 PM

Quote:

Originally Posted by Palf70Step

I have the 88-94 style truck wheel on my 70 and just used stock canceling thingie. Plugged the horn wire into the stock piece. Looks just like the piece you are showing, so I assume it is using stock cancel thingie.

When you use technical jargon like that it confuses the rest of us...

03-15-2022, 11:52 AM	#1
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,597	Turn signal cancel cam I'm just about to finish the rebuild on a 69 Chevy truck non-tilt column, and I'd like to replace the 30 year old turn signal cancel cam. The steering wheel is from a late 80s/ early 90s Chevy truck, but I can't remember if I used a 69 cam or one from a later model, or if it even makes a difference. Is it typical that the "lobes" aren't evenly spaced? Thanks for your help. Attached Images __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

03-15-2022, 12:43 PM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: Turn signal cancel cam I have the 88-94 style truck wheel on my 70 and just used stock canceling thingie. Plugged the horn wire into the stock piece. Looks just like the piece you are showing, so I assume it is using stock cancel thingie. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 03-15-2022 at 12:58 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.