|
07-05-2022, 11:47 AM
|
#1 |
|
Registered User
Join Date: Dec 2018
Location: Dallas, PA
Posts: 551
|
Ground question ?
Where, and how, do you get the best grounds for the parking light housings in the hood, and the tail light housings in the box.
|
|
|
|
07-05-2022, 12:29 PM
|
#2 |
|
Moderator
  
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: Ground question ?
Everything is grounded to the body or frame. Start with your battery and follow the negative wire, if it goes to the engine then is there a ground strap from the engine to the body? Engine to the frame? Frame to the bed?
I'd get some grounding straps and make a clean area on the body to hood, then make sure the area the hood lights are fastened to is clean (for a ground there). Same with the bed, ensure a clean ground and where the tail lights attached to the bed.
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
|
|
|
|
07-05-2022, 08:21 PM
|
#3 |
|
Who Changed This?
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,677
|
Re: Ground question ?
You're in Pennsylvania. I'd recommend some sort of sealer on the ground straps to limit corrosion. It can be as simple as white grease schmeared on them.
__________________
~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA |
|
|
|
07-05-2022, 08:56 PM
|
#4 |
|
Moderator
Join Date: Dec 2012
Location: ON, Canada
Posts: 2,176
|
Re: Ground question ?
Run a screw right into the tail light buckets. Connect that with a wire to a cleaned spot on the bed inside that light opening. Then, a ground from the box to the frame. Then, one from the box to the cab. And another from the cab to the frame. This solves lots of problems, and worked for me!
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
