What did you do to your truck today.The 3rd chapter - Page 133 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72c20customcamper · 10-03-2022, 06:12 PM

When was the last time you saw an oem inner fender with zero rust .

mr.mud1 · 10-03-2022, 06:33 PM

i'm pretty lucky,i have 2 but i know they're few and far between.

**Johnl48** · 10-03-2022, 07:07 PM

Quote:

Originally Posted by Chevys4life

Man...........that paint job looks good. Is that single or two stage?

2 stage

**68bowtie** · 10-03-2022, 09:14 PM

Quote:

Originally Posted by 72c20customcamper

When was the last time you saw an oem inner fender with zero rust .

A truly rust free passenger side is certainly hard to find

**Already Gone** · 10-03-2022, 09:34 PM

Yesterday me and a friend used my Burb and took my newly built SBC to the shop so it can be installed in its new home, my C10.

mr.mud1 · 10-03-2022, 09:48 PM

Quote:

Originally Posted by Already Gone

Yesterday me and a friend used my Burb and took my newly built SBC to the shop so it can be installed in its new home, my C10.

looking good.

**68bowtie** · 10-04-2022, 12:00 AM

Wow I’ll say! Hot dog!

**'68OrangeSunshine** · 10-04-2022, 12:10 AM

Quote:

Originally Posted by 72c20customcamper

When was the last time you saw an oem inner fender with zero rust .

Not since back when people called them ''Fender Skirts.''

**Already Gone** · 10-04-2022, 02:20 AM

Quote:

Originally Posted by mr.mud1

i'm pretty lucky,i have 2 but i know they're few and far between.

One of mine, drivers side at front, needed a small patch. Took to a shop and it was fixed properly.

72c20customcamper · 10-04-2022, 08:46 AM

Quote:

Originally Posted by mr.mud1

i'm pretty lucky,i have 2 but i know they're few and far between.

Definitely not easy to find

Quote:

Originally Posted by 68bowtie

A truly rust free passenger side is certainly hard to find

These came off an Arizona suburban that the owner lowered and put tubes on

Quote:

Originally Posted by '68OrangeSunshine

Not since back when people called them ''Fender Skirts.''

We used to call them inner skirts

72c20customcamper · 10-04-2022, 08:48 AM

Quote:

Originally Posted by Already Gone

Yesterday me and a friend used my Burb and took my newly built SBC to the shop so it can be installed in its new home, my C10.

That's my next project not this truck but my Anniversary truck engine is very tired

Quote:

Originally Posted by Already Gone

One of mine, drivers side at front, needed a small patch. Took to a shop and it was fixed properly.

They did a great job

72c20customcamper · 10-04-2022, 02:31 PM

Raining today so I repainted the grille bowtie I think the color is to red and shiny compared to the fender emblem . I used satin paint maybe flat would be better

**'68OrangeSunshine** · 10-04-2022, 03:03 PM

Quote:

Originally Posted by 72c20customcamper

Raining today so I repainted the grille bowtie I think the color is to red and shiny compared to the fender emblem . I used satin paint maybe flat would be better

The ''Red'' color of the Sixties Bowtie was more of a Tomato red than Crayola Red. Redder than Chevy Engine Orange or Hugger Orange but not as red as fresh blood. [The same color was used on the cover of the '67 Chevy Truck Owners Manual.]
Your new paint looks pretty much like they did when brand new. [At least as far as one can tell on a computer. In person, in full sunlight, it may be more obvious.]
Red is a color that tends to fade from Sun exposure.

Keep what you got and move on. If it bugs you, use the same color on your other badges, so they all match.

LNP · 10-04-2022, 03:11 PM

You guys are doin some great work

72c20customcamper · 10-04-2022, 04:55 PM

Quote:

Originally Posted by '68OrangeSunshine

The ''Red'' color of the Sixties Bowtie was more of a Tomato red than Crayola Red. Redder than Chevy Engine Orange or Hugger Orange but not as red as fresh blood. [The same color was used on the cover of the '67 Chevy Truck Owners Manual.]
Your new paint looks pretty much like they did when brand new. [At least as far as one can tell on a computer. In person, in full sunlight, it may be more obvious.]
Red is a color that tends to fade from Sun exposure.

Keep what you got and move on. If it bugs you, use the same color on your other badges, so they all match.

I dont think it will be to noticable as they arent close to each other on the truck. I was going to buy a new one but I think it will be fine on the truck . And it’s an OEM piece

72c20customcamper · 10-04-2022, 05:07 PM

Quote:

Originally Posted by LNP

You guys are doin some great work

There are a lot of very talented craftsman on this site

LNP · 10-05-2022, 08:47 AM

Quote:

Originally Posted by 72c20customcamper

There are a lot of very talented craftsman on this site

Yes there are and you seem to be one of them.

**Johnl48** · 10-06-2022, 02:47 PM

Some assembly required

crazyjeenyus · 10-06-2022, 03:52 PM

Got started on the post-chop body work.
Posted via Mobile Device

**Jiggers72-GMC** · 10-07-2022, 07:28 AM

I'm not sure if its just the picture angle but why is the wheel so far ahead and not centered in the opening ???

crazyjeenyus · 10-07-2022, 09:05 AM

Quote:

Originally Posted by Jiggers72-GMC

I'm not sure if its just the picture angle but why is the wheel so far ahead and not centered in the opening ???

The box is sitting back on the frame so the sanding tools don’t scuff the clear coat on the back of the cab…..
Posted via Mobile Device

crazyjeenyus · 10-07-2022, 09:08 AM

Quote:

Originally Posted by crazyjeenyus

The box is sitting back on the frame so the sanding tools don’t scuff the clear coat on the back of the cab…..
Posted via Mobile Device

Posted via Mobile Device

72c20customcamper · 10-07-2022, 11:03 AM

Quote:

Originally Posted by crazyjeenyus

The box is sitting back on the frame so the sanding tools don’t scuff the clear coat on the back of the cab…..
Posted via Mobile Device

First picture was deceiving.

Got the new wire drive wheel for the mig . Night and day difference welding light steel . After I blasted the fender I found a few perforations so I cut more out of the donor fender .

OregonNed · 10-07-2022, 12:12 PM

Changing things up by putting on some of the deluxe marker lights.

zellway · 10-07-2022, 01:48 PM

Need to clean up the engine bay but I finally got the last little parts to get my belt drive system installed. This is the same setup I run on my suburban. Stock fan shroud with a 2008 Jeep Grand Cherokee electric fan works great in the arizona heat. Having ac next summer will be so nice

10-03-2022, 06:12 PM	#3301
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,714	Re: What did you do to your truck today.The 3rd chapter When was the last time you saw an oem inner fender with zero rust . Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

10-03-2022, 06:33 PM	#3302
mr.mud1 Registered User Join Date: Dec 2020 Location: Joggins Nova Scotia Posts: 1,597	Re: What did you do to your truck today.The 3rd chapter i'm pretty lucky,i have 2 but i know they're few and far between. Attached Images

10-03-2022, 09:34 PM	#3305
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,143	Re: What did you do to your truck today.The 3rd chapter Yesterday me and a friend used my Burb and took my newly built SBC to the shop so it can be installed in its new home, my C10. Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

10-04-2022, 12:00 AM	#3307
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,795	Re: What did you do to your truck today.The 3rd chapter Wow I’ll say! Hot dog! __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

10-04-2022, 02:31 PM	#3312
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,714	Re: What did you do to your truck today.The 3rd chapter Raining today so I repainted the grille bowtie I think the color is to red and shiny compared to the fender emblem . I used satin paint maybe flat would be better Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary. Last edited by 72c20customcamper; 10-04-2022 at 02:42 PM.

10-04-2022, 03:11 PM	#3314
LNP Registered User Join Date: Mar 2014 Location: Pekin, Illinois Posts: 442	Re: What did you do to your truck today.The 3rd chapter You guys are doin some great work __________________ Harley 1969 Chevy C-10 Long Bed, 350cid, 700R4

10-06-2022, 02:47 PM	#3318
Johnl48 Senior Member Join Date: Jun 2021 Location: West milford nj Posts: 326	Re: What did you do to your truck today.The 3rd chapter Some assembly required

10-06-2022, 03:52 PM	#3319
crazyjeenyus Registered User Join Date: Feb 2015 Location: Lethbridge Alberta, Canada Posts: 167	Got started on the post-chop body work. Posted via Mobile Device Attached Images

10-07-2022, 07:28 AM	#3320
Jiggers72-GMC Senior Member Join Date: Mar 2021 Location: up North Posts: 550	Re: What did you do to your truck today.The 3rd chapter I'm not sure if its just the picture angle but why is the wheel so far ahead and not centered in the opening ??? __________________ Gerry, North Bay Ontario 1971 Chevy K10 short stepper, 518 med green & white 1972 GMC C1500 long box, dark Brown, owned since 1977 1969 GMC C2500 manual

10-07-2022, 12:12 PM	#3324
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today.The 3rd chapter Changing things up by putting on some of the deluxe marker lights. Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

10-07-2022, 01:48 PM	#3325
zellway Registered User Join Date: Dec 2009 Location: Arizona City, AZ Posts: 747	Re: What did you do to your truck today.The 3rd chapter Need to clean up the engine bay but I finally got the last little parts to get my belt drive system installed. This is the same setup I run on my suburban. Stock fan shroud with a 2008 Jeep Grand Cherokee electric fan works great in the arizona heat. Having ac next summer will be so nice Attached Images __________________ ----------------------------------------------------------- Erik My 69 suburban http://67-72chevytrucks.com/vboard/s...d.php?t=530626 1970 C10 step Project Jiminy http://67-72chevytrucks.com/vboard/s...d.php?t=682647 RUST!? Thats just mother natures way of telling all of us.....MINE!!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.