rear backing plates - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevy nutcase · 10-08-2022, 02:44 PM

On the 71 c10 rear I am rebuilding for my 66 c10 I'm in need of the backing plates and after a bit of searching I can't seem to locate anyone selling them new. what I did find was a guy on marketplace with a healthy collection of these trucks from 60-72. I have him looking for a good set from a 71 or 72 and my question is, would c10 trucks from 64-72 all be the same backing plates if they have the gm 12 bolt with 11" brakes? I need all the other pieces as well like the ebrake lever, self-adjuster arm, etc. and I may as well take those if in useable condition and are compatible

**Steeveedee** · 10-08-2022, 04:24 PM

I'm pretty sure they are, but get pictures to make sure.

**cwcarpenter98** · 10-08-2022, 11:57 PM

The 63, and I think 64, truck 12 bolts have press on backing plates. 65+ truck 12 bolts have bolt on. I believe they are the same, but I'm sure someone knows for certain.

On the brake hardware parts, get stuff from 65 at the oldest so you can have the self adjusting parts and pieces

Chevy nutcase · 10-09-2022, 01:16 AM

Quote:

Originally Posted by cwcarpenter98

The 63, and I think 64, truck 12 bolts have press on backing plates. 65+ truck 12 bolts have bolt on. I believe they are the same, but I'm sure someone knows for certain.

On the brake hardware parts, get stuff from 65 at the oldest so you can have the self adjusting parts and pieces

One might wonder why I dont use the backing plates off my 66 and I briefly considered that but I have 2 interested parties who want the 66 6 lug diff and probably want it complete. I was also wondering if there were design changes in 73 and up square body trucks

As for the early c10s having pressed on backing plates is just cruel engineering, thank goodness they got away from that setup.

10-08-2022, 02:44 PM	#1
Chevy nutcase Registered User Join Date: Mar 2021 Location: Hershey Pennsylvania Posts: 337	rear backing plates On the 71 c10 rear I am rebuilding for my 66 c10 I'm in need of the backing plates and after a bit of searching I can't seem to locate anyone selling them new. what I did find was a guy on marketplace with a healthy collection of these trucks from 60-72. I have him looking for a good set from a 71 or 72 and my question is, would c10 trucks from 64-72 all be the same backing plates if they have the gm 12 bolt with 11" brakes? I need all the other pieces as well like the ebrake lever, self-adjuster arm, etc. and I may as well take those if in useable condition and are compatible

10-08-2022, 04:24 PM	#2
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,610	Re: rear backing plates I'm pretty sure they are, but get pictures to make sure. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

10-08-2022, 11:57 PM	#3
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,483	Re: rear backing plates The 63, and I think 64, truck 12 bolts have press on backing plates. 65+ truck 12 bolts have bolt on. I believe they are the same, but I'm sure someone knows for certain. On the brake hardware parts, get stuff from 65 at the oldest so you can have the self adjusting parts and pieces __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.