The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-24-2023, 12:49 AM   #1
1968C10Custom
Registered User
 
Join Date: Jul 2023
Location: Los Osos, CA
Posts: 1
1968 C10 u-joints?

Hello!

I recently picked up a 1968 C10 Custom, originally had a 307 w/3-speed manual and overdrive, but now apparently has a 1972 Chevy pickup engine and tranny in it (350 and TH350).

I'm trying to determine exactly which model (size) universal joints are correct for this truck. The 2-piece driveshaft that is currently in the truck *might* possibly be from the donor 1972 Chevy, or might be original to the truck, I would like to know.

All three u-joints in the existing 2-piece driveshaft are identical in size to each other. The caps measure about 1-1/16" in diameter, and the end to end measurement is a little less than 3.5", maybe around 3-1/4" or so.

When I go looking online to purchase u-joints for this truck, I am met with all kinds of inconsistencies, much of the time it's being suggested that the three u-joints are not supposed to be of the same size. (?) Different part numbers are specified for center, tranny end, etc. Some vendors suggest it should be one or more of the 1-1/16" cap u-joints, others suggest it should be the 1-3/16" cap u-joints, etc. Haven't yet gotten a conclusive answer.

Can anyone set me straight on what u-joint configuration is factory stock for a 1968 C10 Custom (with original 307 V8 and 3-speed manual, with overdrive), and *also* what u-joint configuration is stock for a 1972 C10 with 350 V8 and TH350 auto trans?

Of course I can always just pull all three u-joints out of my truck and bring them down to my local Napa store and have them match what I have, but I am currently out of town and trying to get these parts ordered in advance so they'll be on my doorstep when I return. As well, I'm just simply curious as to what config is factory stock, regardless.

Lastly, anyone have a favorite brand / model u-joint? I won't be racing this truck, but I'm willing to pay extra for something that is specifically heavy-duty and long-lasting. Might be towing and/or carrying heavy loads up steep hills, etc. How about a Moog Super Strength non-greasable?

Thank you
1968C10Custom is offline   Reply With Quote
Old 08-24-2023, 03:58 AM   #2
Richard
Senior Member
 
Join Date: Dec 1999
Location: Southern California
Posts: 2,881
Re: 1968 C10 u-joints?

C10 used a 1310 ujont. 1.062 cap. Probably what you need. Next up is 1350 which has a larger cap. Spicer is a brand that has been around for a long time. Do not over think it. U-joints are all the same. Unless someone changed it.
__________________
Richard
1972 K10 Custom Deluxe SWB Fleetside
My build https://67-72chevytrucks.com/vboard/...d.php?t=800746

Last edited by Richard; 08-24-2023 at 04:09 AM.
Richard is offline   Reply With Quote
Old 08-24-2023, 07:24 AM   #3
hewittca
Registered User
 
hewittca's Avatar
 
Join Date: Jun 2014
Location: Mocksville, NC
Posts: 1,765
Re: 1968 C10 u-joints?

I just had my 2 piece driveshaft rebuilt for my 72 GMC. It had the 1.0625" u-joints as mentioned above at all three joints. I used Moog part number 369 and so far I am happy with them.
__________________
Builds: Green Gus the 68 C10 | Bluey the 72 1500 | Lowly the 70 C10
-
Instagram: @dr.hewitt
-
C10 Concept/Development Photos: Master Thread
hewittca is offline   Reply With Quote
Old 08-24-2023, 08:58 AM   #4
ghackett1
68 C10 Longbed
 
ghackett1's Avatar
 
Join Date: Sep 2006
Location: Naples, Florida
Posts: 519
Re: 1968 C10 u-joints?

My 68 C10 fleetside has 1310 u joints and when I recently replaced them I installed Spicer HD 1310 replacements so same size. FWIW
ghackett1 is offline   Reply With Quote
Old 08-24-2023, 10:44 AM   #5
OregonNed
Registered User
 
OregonNed's Avatar
 
Join Date: Dec 2012
Location: Vancouver, Washington
Posts: 1,644
Re: 1968 C10 u-joints?

Quote:
Originally Posted by ghackett1 View Post
My 68 C10 fleetside has 1310 u joints and when I recently replaced them I installed Spicer HD 1310 replacements so same size. FWIW
Me too - wonderful joints
__________________
1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop
OregonNed is offline   Reply With Quote
Old 08-24-2023, 02:44 PM   #6
67C10Step
Registered User
 
67C10Step's Avatar
 
Join Date: Jul 2019
Location: Beebe, AR
Posts: 2,475
Re: 1968 C10 u-joints?

Quote:
Originally Posted by ghackett1 View Post
My 68 C10 fleetside has 1310 u joints and when I recently replaced them I installed Spicer HD 1310 replacements so same size. FWIW
Make that three. When I rebuilt the driveshaft on my 67 it went as expected and no major issues.
__________________
1967 C10
1980 Jeep CJ5
2020 Toyota 4Runner
2024 Toyota Tundra
67C10Step is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:53 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com