What did you do today not on your truck... - Page 196 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ol Blue K20** · 11-06-2023, 11:39 AM

Quote:

Originally Posted by LockDoc

Thanks Dale. I just hope Paul has the same outcome.....

LockDoc

Yes, I agree.

**71CHEVYSHORTBED402** · 11-06-2023, 12:47 PM

Quote:

Originally Posted by mr.mud1

nothing very glamorous,spend yesterday and the day before,digging a trench about 30 feet long to run some drainage pipe and a pop-up emitter to get the rain gutter water away from the house.since i'm smart like a tree stump,i started digging with a shovel???cause i wasn't going that far,i told myself.after a few feet,i made an executive decision and said,the heck with that,regardless of how far i plan to go or not go,that's a job for the tractor!much better plan.

Boy that will do it. Unfortunately I've always done it the hard way. Would love to have a tractor. And that view, wow.

72c20customcamper · 11-06-2023, 03:36 PM

Fourth and hopefully last load to go in the basement

72c20customcamper · 11-07-2023, 06:30 PM

Replaced the decking I’m going to extend the deck 12 feet next spring so I didn’t replace the post and rails . Used the Camo system so no visible decking screws little pricy but it looks so much nicer .

**Steeveedee** · 11-07-2023, 07:55 PM

Made an 80 mile round trip for a "tiger oak" solid wood dresser. I plan to use it in my carving area to set my small carving tool chest and stuff things in the drawers. That will give me room on the carving bench. It's still in the bed of the truck, and the sellers already deleted the posting, so no picture, yet. If anyone wants to see it, that is. Can't buy the materials for what I spent on it.

**LockDoc** · 11-09-2023, 11:56 AM

-
Low on cookies so I baked some Peanut Butter cookies this morning. Now I have to go out and get to work....

LockDoc

Rich84 · 11-09-2023, 02:23 PM

Boy I wish i could smell those cookies..

Good luck to you Paul and good to hear from you. Welcome to the Squarebody club. Beware, you'll be looking for another before you know it.

**Ol Blue K20** · 11-09-2023, 08:13 PM

Ship me some!!! One of my very most FAVORITE THINGS!!!!!!

**LockDoc** · 11-09-2023, 09:04 PM

Quote:

Originally Posted by Rich84

Boy I wish i could smell those cookies..

Good luck to you Paul and good to hear from you. Welcome to the Squarebody club. Beware, you'll be looking for another before you know it.

Smells are free....

Quote:

Originally Posted by Ol Blue K20

Ship me some!!! One of my very most FAVORITE THINGS!!!!!!

Feel free to come out and pick some up Dale. I will even make some home made ice cream to go along with them....

LockDoc

mr.mud1 · 11-09-2023, 09:18 PM

Quote:

Originally Posted by 71CHEVYSHORTBED402

Boy that will do it. Unfortunately I've always done it the hard way. Would love to have a tractor. And that view, wow.

hi Tony.you'd think i'd learn?tractor was a big help.get up here and see us sometime,i'll share the view and the tractor.take care.

**Ol Blue K20** · 11-10-2023, 08:49 PM

Quote:

Originally Posted by LockDoc

Smells are free....

Feel free to come out and pick some up Dale. I will even make some home made ice cream to go along with them....

LockDoc

I would love to come that way someday!!!!!

**LockDoc** · 11-10-2023, 11:59 PM

Quote:

Originally Posted by Ol Blue K20

I would love to come that way someday!!!!!

You are welcome any time.

LockDoc

**special-K** · 11-11-2023, 07:41 AM

Those are some good looking peanut butter cookies. Pressing makes them taste even better.

**LockDoc** · 11-11-2023, 10:08 AM

Quote:

Originally Posted by special-K

Those are some good looking peanut butter cookies. Pressing makes them taste even better.

It brings out more flavor....

It also makes them cool quicker.

LockDoc

Gotenntitans · 11-12-2023, 09:29 PM

Picked up a few pecans this weekend. Wifey made a pecan pie today….sorry fans, it’s just about all gone already.

**Steeveedee** · 11-12-2023, 10:40 PM

Quote:

Originally Posted by Gotenntitans

Picked up a few pecans this weekend. Wifey made a pecan pie today….sorry fans, it’s just about all gone already.

Pecan pie has to be one of my favorite substances, just ahead of carrot cake. I'm sure you enjoyed that pie. I should go to the store and get some of each, though I'm betting your wife's pecan pie has it all over store-bought!

**special-K** · 11-13-2023, 08:00 AM

Great pictures! The first is best but even the second showing just a piece of tailgate. Just an old truck and some pecans.

Is it pee-cans, pee-cons, or peekins

Gotenntitans · 11-13-2023, 11:36 AM

Thanks for the kind comments, guys. Yeah, my wife uses my mom's pecan pie recipe with a little cinnamon and a TBS of bourbon in it. It's a keeper!

I'm from Arkansas......those are PACONNS.

My Grandma always called her pie Karo Nut Pie. I don't care what it's called, but it aint Thanksgiving & Christmas without two or three of them sitting out on the dessert table.

I'll share my mom's recipe with yall later. I made a tiktok of it and I'll share the link, but I'll share the recipe when I lay my eyes on it for those who don't do the tok thing.

**LockDoc** · 11-13-2023, 02:39 PM

Quote:

Originally Posted by Gotenntitans

Thanks for the kind comments, guys. Yeah, my wife uses my mom's pecan pie recipe with a little cinnamon and a TBS of bourbon in it. It's a keeper!

I'm from Arkansas......those are PACONNS.

My Grandma always called her pie Karo Nut Pie. I don't care what it's called, but it aint Thanksgiving & Christmas without two or three of them sitting out on the dessert table.

I'll share my mom's recipe with yall later. I made a tiktok of it and I'll share the link, but I'll share the recipe when I lay my eyes on it for those who don't do the tok thing.

I would like to have a copy. I don't do Tik-Tok.

Thanks,
LockDoc

72c20customcamper · 11-13-2023, 07:20 PM

Planed down some 4/4 pine I milled a few years ago. Made the soffit ends used the pvc boards for the facia . Next having the guy come and do seamless gutters . Before and after

Gotenntitans · 11-13-2023, 08:03 PM

Quote:

Originally Posted by Gotenntitans

Thanks for the kind comments, guys. Yeah, my wife uses my mom's pecan pie recipe with a little cinnamon and a TBS of bourbon in it. It's a keeper!

I'm from Arkansas......those are PACONNS.

My Grandma always called her pie Karo Nut Pie. I don't care what it's called, but it aint Thanksgiving & Christmas without two or three of them sitting out on the dessert table.

I'll share my mom's recipe with yall later. I made a tiktok of it and I'll share the link, but I'll share the recipe when I lay my eyes on it for those who don't do the tok thing.

Here’s my TikTok link to the recipe.
https://www.tiktok.com/t/ZT8DAjFXV/
Arkansas Pecan Pie recipe:
1/2 stick softened salted butter *I use real butter*
1 cup brown sugar
1 cup light Karo syrup
Cream together with electric mixer. Then add:
3 eggs
1/8 tsp salt
1 tsp vanilla
1 Tbsp bourbon
1/2 tsp cinnamon
1 Tbsp flour
Mix well. Then pour over 1 cup of pecans that you’ve already put in your deep dish pie shell. Bake at 350 degrees for about 50 minutes.

Y’all let me know if you make it and if you like it. Enjoy!

**Boog** · 11-14-2023, 07:32 AM

Paconns is the way we pronounce em too.

**special-K** · 11-14-2023, 07:47 AM

I forgot about the puh-cons and puh-cans pronunciation and that's how I do it. (puhcons). I know one thing, I always know what people mean.

**special-K** · 11-14-2023, 07:53 AM

Quote:

Originally Posted by 72c20customcamper

Replaced the decking I’m going to extend the deck 12 feet next spring so I didn’t replace the post and rails . Used the Camo system so no visible decking screws little pricy but it looks so much nicer .

Looks good. Fasteners of all sorts have come a long way, but none are cheap. I never really figured fasteners in my bids years ago. I sure do now! heck, even nails are expensive these days

Quote:

Originally Posted by 72c20customcamper

Planed down some 4/4 pine I milled a few years ago. Made the soffit ends used the pvc boards for the facia . Next having the guy come and do seamless gutters . Before and after

We call that the chicken head

**LockDoc** · 11-14-2023, 11:02 AM

Quote:

Originally Posted by Gotenntitans

Here’s my TikTok link to the recipe.
https://www.tiktok.com/t/ZT8DAjFXV/
Arkansas Pecan Pie recipe:
1/2 stick softened salted butter *I use real butter*
1 cup brown sugar
1 cup light Karo syrup
Cream together with electric mixer. Then add:
3 eggs
1/8 tsp salt
1 tsp vanilla
1 Tbsp bourbon
1/2 tsp cinnamon
1 Tbsp flour
Mix well. Then pour over 1 cup of pecans that you’ve already put in your deep dish pie shell. Bake at 350 degrees for about 50 minutes.

Y’all let me know if you make it and if you like it. Enjoy!

Printed it out. Seems pretty simple. I bet I can even do it myself....

I need to get some fresh Pecans. Mine have been in the freezer for a while.

LockDoc
.

11-06-2023, 03:36 PM	#4878
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,716	Re: What did you do today not on your truck... Fourth and hopefully last load to go in the basement Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

11-07-2023, 06:30 PM	#4879
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,716	Re: What did you do today not on your truck... Replaced the decking I’m going to extend the deck 12 feet next spring so I didn’t replace the post and rails . Used the Camo system so no visible decking screws little pricy but it looks so much nicer . Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

11-07-2023, 07:55 PM	#4880
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,676	Re: What did you do today not on your truck... Made an 80 mile round trip for a "tiger oak" solid wood dresser. I plan to use it in my carving area to set my small carving tool chest and stuff things in the drawers. That will give me room on the carving bench. It's still in the bed of the truck, and the sellers already deleted the posting, so no picture, yet. If anyone wants to see it, that is. Can't buy the materials for what I spent on it. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

11-09-2023, 11:56 AM	#4881
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,771	Re: What did you do today not on your truck... - Low on cookies so I baked some Peanut Butter cookies this morning. Now I have to go out and get to work.... LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

11-09-2023, 02:23 PM	#4882
Rich84 Registered User Join Date: Mar 2012 Location: Woodbury, Ct. Posts: 1,692	Re: What did you do today not on your truck... Boy I wish i could smell those cookies.. Good luck to you Paul and good to hear from you. Welcome to the Squarebody club. Beware, you'll be looking for another before you know it.

11-09-2023, 08:13 PM	#4883
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: What did you do today not on your truck... Ship me some!!! One of my very most FAVORITE THINGS!!!!!! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

11-11-2023, 07:41 AM	#4888
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: What did you do today not on your truck... Those are some good looking peanut butter cookies. Pressing makes them taste even better. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-12-2023, 09:29 PM	#4890
Gotenntitans Registered User Join Date: Aug 2013 Location: Camden, Arkansas Posts: 984	Re: What did you do today not on your truck... Picked up a few pecans this weekend. Wifey made a pecan pie today….sorry fans, it’s just about all gone already. __________________ GoTennTitans 1987 GMC Sierra 1990 GMC Sierra (stolen) 2003 Chevy Silverado

11-13-2023, 08:00 AM	#4892
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: What did you do today not on your truck... Great pictures! The first is best but even the second showing just a piece of tailgate. Just an old truck and some pecans. Is it pee-cans, pee-cons, or peekins __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-13-2023, 11:36 AM	#4893
Gotenntitans Registered User Join Date: Aug 2013 Location: Camden, Arkansas Posts: 984	Re: What did you do today not on your truck... Thanks for the kind comments, guys. Yeah, my wife uses my mom's pecan pie recipe with a little cinnamon and a TBS of bourbon in it. It's a keeper! I'm from Arkansas......those are PACONNS. My Grandma always called her pie Karo Nut Pie. I don't care what it's called, but it aint Thanksgiving & Christmas without two or three of them sitting out on the dessert table. I'll share my mom's recipe with yall later. I made a tiktok of it and I'll share the link, but I'll share the recipe when I lay my eyes on it for those who don't do the tok thing. __________________ GoTennTitans 1987 GMC Sierra 1990 GMC Sierra (stolen) 2003 Chevy Silverado

11-13-2023, 07:20 PM	#4895
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,716	Re: What did you do today not on your truck... Planed down some 4/4 pine I milled a few years ago. Made the soffit ends used the pvc boards for the facia . Next having the guy come and do seamless gutters . Before and after Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary. Last edited by 72c20customcamper; 11-13-2023 at 07:25 PM.

11-14-2023, 07:32 AM	#4897
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,513	Re: What did you do today not on your truck... Paconns is the way we pronounce em too. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

11-14-2023, 07:47 AM	#4898
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: What did you do today not on your truck... I forgot about the puh-cons and puh-cans pronunciation and that's how I do it. (puhcons). I know one thing, I always know what people mean. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.