Rear blinker / brake light housing

[Reno]

Is the metal brake / turn / reverse light signal housing the same for all 67-72 Pickup / Suburban & Blazers?

I realize they didn't make Blazers until 1969.

I also realize the Suburban lense is unique.

Thanks in advance.

[Rust_never_sleeps]

I typically check the LMC website for this kind o' question. They'll break it down in the table below the diagram if there are variations by year/model/etc

[LockDoc]

Originally Posted by Reno

Is the metal brake / turn / reverse light signal housing the same for all 67-72 Pickup / Suburban & Blazers?

I realize they didn't make Blazers until 1969.

I also realize the Suburban lense is unique.

Thanks in advance.

Suburban tail light housings are different than pickup. they have a small bracket spot welded onto the back of them. I can't remember if it is on the top or bottom. The reverse light housings are different too, the suburbans are square.
.