|
02-28-2024, 01:38 AM
|
#1 |
|
Registered User
Join Date: May 2021
Location: Tumwater Wa
Posts: 53
|
exterior wireloom
I'm going to run the taillight harness along the frame, looking for ideas of what are my options for this approach.
|
|
|
|
02-28-2024, 10:11 AM
|
#2 |
|
All stock and staying that way
 
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,844
|
Re: exterior wireloom
On the trucks/Blazers, the main rear lamp harness runs inside the drivers frame rail from the cowl to the rear crossmember and is attached to the frame using these vinyl coated spring steel clips:
__________________
1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion..  1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor...  2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels |
|
|
 |
| Bookmarks |
|
|
Linear Mode
