inner roof a pillar pictures, Please

[twoskies]

Evening

apologize for long post

been awhile since ive been able to work on my 66 C10 (Wife had to have major surgery, she's doing great)

i had replaced the inner roof and originally to get almost no gap at the a pillar, i would have about a 1/4 inch of metal below the windshield pinch weld on the drivers side
so i recut the welds and made it as close to even on the windshield pinch seam

what this caused is the gap at the a pillar on the drivers side is about 1/4 inch and the passenger side is not quite 1/8, for the most part the passenger side has never changed
it does slide into the slot on both sides, obviously not as much on the drivers side

i did take a windshield that had a crack in it and a new gasket and it seals up the same all around, im afraid if i dropped it on the drivers side the gasket and windshield might not fit as well

im guessing since this is the inner roof, it probably wont make much difference

does anyone have pictures of the gaps driver and passenger inside a pillar
would be very much appreciated

Thank You

[twoskies]

Well my ocd got the best of me
Broke all the welds loose and readjusted the panel
Gaps are so close now you would need to measure them


Thanks