dg 4 mirror ???

[06rdking]

I really messed up this time twisted off a (stud ?) on the lower side of the elbow arm on my mirror . my question is are the threaded ends a stud or are the threads machined into the elbow ? I cant tell by looking at it. was going to try to get the end out but still not sure . please advise, thanks , steve

[06rdking]

boy , you guys are a lot of help. just for the record , I have figured out that the threaded ends are one piece to the elbow arm . so no extracting the threaded end out of the elbow arm. 79 reads on my question and not one opinion?

[Richard]

Only been a few days and you are not a very active user, be patient. Installed DG4's on my truck. Also have an extra set plus another set of D29 painted mirrors as originally ordered. Find it hard to believe the threaded pieces are not studs. Will look at my other mirrors for you by the weekend. Either way, drill out and rethread. Or there are replacements available. The mirrors were not OEM anyway. Just sourced from outside venders.

[Stocker]

Originally Posted by 06rdking

boy , you guys are a lot of help. just for the record , I have figured out that the threaded ends are one piece to the elbow arm . so no extracting the threaded end out of the elbow arm. 79 reads on my question and not one opinion?

I didn't see the point in me replying with "I don't know". Glad you figured it out.