Cpp modular spindle steering stops

[ullose272]

I just installed some cpp modular drop spindles and noticed they did not have steering stops like the drop spindles that were installed. It look like there might be a threaded hole for possibly a bolt on steering stop, but i cant find anything online.
Thoughts?

[HO455]

Please, help us, help you! Post some photos!

[ullose272]

Pics

[ullose272]

Called them, they do not have a steering stop and just use the steering box to limit, howevermy wheels hit the shocks and upper control arm befor full lock. So i might fab something up

[HalfBrit]

Here’s a pic of my CPP spindles, using the threaded boss for a steering stop

[ullose272]

Originally Posted by HalfBrit

Here’s a pic of my CPP spindles, using the threaded boss for a steering stop

This is what i ended up doing. What length bolt did you use?

[HalfBrit]

I’ll check tomorrow. Since my body and inner fenders haven’t been installed since I did my chassis work, I have no way of knowing if the stops are going to be the correct length. Regardless, make sure thread depth through the spindle doesn’t contact the brake disc.

[ullose272]

Originally Posted by HalfBrit

IÂ’ll check tomorrow. Since my body and inner fenders havenÂ’t been installed since I did my chassis work, I have no way of knowing if the stops are going to be the correct length. Regardless, make sure thread depth through the spindle doesnÂ’t contact the brake disc.

I used 2 1/2 bolt and a nut for a jam nut. The wheel comes real close to the shock i may need to go to a 3" and thread it in some more or cut the 3" to about 2 3/4. Ill see when i go drive it