NV Parts Lot, Primarily 1971-ish Truck Stuff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71CHEVYSHORTBED402** · 08-27-2025, 07:52 PM

Everything here is sold, even if it doesn't read so. The only exceptions are the jack assembly, and the rear license plate lamp. I'll put those on a new thread. Thanks a bunch.

NOS Stuff

NOS rear license plate lamp, $75

NOS Outer roll-up window sweeps, $150 SOLD

NOS Vent Window Channels, for the roll up window's front. I can unwrap them for a picture if you like. I've seen them before, they're perfect, including the chrome strips. Maybe you've seen these before, they're basically GM replacements. The tops aren't quite like original but they work. They do not come with brackets to mount it to the doors, nor the holes for the brackets, they'll have to be drilled, $125. SOLD

NOS interior door handles, $100 SOLD

NOS replacement rear lenses. These have some of the same markings as GUIDEX lenses, the appearance too, and they're at least as heavy as original. These are better quality than today’s replacements, and are very clean, $20.

NOS hose breather Assm., 10118694, probably not for trucks - if you recognize it $2, I think the old pinch clamps are worth that☺

NOS crankcase hose pipe, PCV, adapter, 3856955. Looks like some 66-67s take it, for example, $5

NOS crankcase fire arrestor. I don’t know the application short the fittings are BIG, $25. Nice score if a guy needs it. Okay, $20, no, $15☺, no, $8.

NOS emblem paint syringes - apparently. I'll just keep them.

NOS vintage radiator hose clamps for couldn’t tell you. If you like them $5. Let me know if you need measurements, they're pretty cool.

OEM Stuff

OEM lug jack, handle and lug wrench. Works, the metal excellent and real nice finish $120.

Two nice C10 hub caps. One never painted and the stainless is perfect. The other was painted and polished, but has a few small dings that are an easy fix, described the arrows in the image. Can’t imagine why someone painted and polished it so nice, dings included. These are not a matching pair, while it's not easy to distinguish, GM installed many varieties of these stainless caps, the differences are primarily at the ring surrounding the bow tie, and weights can vary too. Asking $70 each. SOLD

OEM truck tie downs, they’re in excellent shape and will clean-up super if you care to, the finishes are perfect either way. I don’t know what they’re worth, but if someone is looking for these, I think $25 would be a

deal. SOLD

One NOS Deluxe Badge with some pitting. The other is used, but the chrome is beautiful, $10 for both.

Two OEM 400 badges. One has excellent chrome, the other is okay, and was used to experiment with a black epoxy finish. FWW, it held up remarkably under test conditions, $5

OEM oil cap, I think so anyway, hmm. Buy something else it's free.

OEM Grille brackets, for a 1971-72, perhaps earlier too, I don’t know. $40 SOLD

OEM tail housings, nice shape, $25 SOLD

One fuel cap, I believe it's OEM, for an auillary tank, needs a new gasket - buy something it's free.

One OEM spare tire bolt and wing nut. It's OEM, but I don't know the application, $10, wing-nut is worth that easy, hmm, maybe I'll keep it☺ Called for☺

Couple of OEM bed towers, buy something it's free.

OEM washer bottle bracket, $10 SOLD

Nice pliable and clean OEM brake pad: $3 I'll just keep it.

Some vacuum fitting, if you recognize it - free if you're paying shipping. called for

OEM points distributor and parts. It came off a 1971 402/400. The distributor (1112064-0M7) basically failed back in the 90s, I switched to HEI. I don’t know why the distributor failed, someone else was doing the work. If you want these parts just pay shipping. CALLED FOR

Replacement Stuff

New replacement sport bumper bolts and hardware. Somewhat replacement, the fronts are supposed to have smaller heads, what can you do, I suspect the fronts aren't reproduced. $8

New replacement bed bolts with hardware, $15 SOLD

New replacement 5/16-18 Rally cap bolts, 20 of them, $7

New brake boot, free if you buy something. I'll just keep it.

New blower gasket at the firewall. I'll just keep it.

New replacement fuel sender for without a return line. Part number 72-9300-S, $20 is half the price otherwise available on this part.

New replacement heater water hose tower clamps, $5

New correct type replacement thermostat housing, since painted with POR15 engine. Sprayed if I remember right, turned out pretty nice. I ended up with three of them somehow☺ Spray isn't as durable as a brush with por-15 engine FWW, which applies nicely on cast iron. Looking forward to painting the original housing I thought I wasn't using SOLD

Buy something for $15 more I'll put a copy of the kit into the box. It's described by my signature.

**71CHEVYSHORTBED402** · 08-27-2025, 07:56 PM

More OEM stuff

**71CHEVYSHORTBED402** · 08-27-2025, 07:57 PM

Replacement stuff

**jimer1964** · 08-27-2025, 08:08 PM

I will get in line for the hub caps if you will separate , Also interested in the thermostat housing Thank you

**Louisvillekytruck** · 08-27-2025, 08:43 PM

I will take the washer bottle bracket and tail light housings and bed bolts. Let me know how much and how to pay thanks 40291

**71CHEVYSHORTBED402** · 08-27-2025, 08:48 PM

Quote:

Originally Posted by jimer1964

I will get in line for the hub caps if you will separate , Also interested in the thermostat housing Thank you

Looks like I'm separating. I see I didn't put a price on the housing, ooops. We'll make it work, thank you. $150 sound good before shipping?

Here are better pictures of the blue cap showing the flaws mentioned. The original picture was unclear. FWW, the blue cap's design is the nicest I've seen, lots of bling, and it's heavy too.

I'll respond to each post in this thread as a place holder. I have to get boxes, some packing material and shipping quotes yet, the caps for instance will be insured. I won't have access to the parts for 12 days, at that point I'll prepare shipping and PM the amt., and we can figure out payment methods then. That said, I'm going to pack the caps and housing tomorrow, edit, I've already packed it, pending zip code. It will go a long way if buyers are willing to post their zip codes with their deals, so I'm prepared, thanks. Still open to deals on volume.

**71CHEVYSHORTBED402** · 08-27-2025, 09:16 PM

Quote:

Originally Posted by Louisvillekytruck

I will take the washer bottle bracket and tail light housings and bed bolts. Let me know how much and how to pay thanks

I'll respond to each post in this thread as a place holder. I have to get boxes, some packing material and shipping quotes yet. I won't have access to the parts for 12 days, at that point I'll prepare shipping and PM the amt., and we can figure out payment methods then. That said, I'm going to pack your parts tomorrow, perhaps a medium flat rate will do. How's $40 sound, before shipping?

It will go a long way if buyers are willing to post their zip codes with their deals, so I'm prepared. Thank you.

**Louisvillekytruck** · 08-27-2025, 09:24 PM

Quote:

Originally Posted by 71CHEVYSHORTBED402

I'll respond to each post in this thread as a place holder. I have to get boxes, some packing material and shipping quotes yet. I won't have access to the parts for 12 days, at that point I'll prepare shipping and PM the amt., and we can figure out payment methods then. That said, I'm going to pack your parts tomorrow, perhaps a medium flat rate will do. How's $40 sound, before shipping?

It will go a long way if buyers are willing to post their zip codes with their deals, so I'm prepared. Thank you.

Sounds great . How much more for the grille brackets

**71CHEVYSHORTBED402** · 08-27-2025, 10:10 PM

Quote:

Originally Posted by Louisvillekytruck

Sounds great . How much more for the grille brackets

Think I have to get $35 as opposed the asking of $40, the box will run me another $5 or so. Let me know, and what your zip is at some point, so I can get a shipping quote, thank you

**Louisvillekytruck** · 08-27-2025, 10:23 PM

Quote:

Originally Posted by 71CHEVYSHORTBED402

Think I have to get $35 as opposed the asking of $40, the box will run me another $5 or so. Let me know, and what your zip is at some point, so I can get a shipping quote, thank you

I will take them 40291 thanks again

**71CHEVYSHORTBED402** · 08-27-2025, 10:50 PM

Quote:

Originally Posted by Louisvillekytruck

I will take them 40291 thanks again

Cool, thanks. I'll pack tomorrow and send a quote too.

**D.PASSMORE** · 08-28-2025, 08:37 AM

Ill take these: NOS interior door handles, $100

**Sold - payment sent

**Dave** · 09-07-2025, 07:39 PM

Hi Tony,
What's the numbers on the distributor? Also, what are the numbers on the window sweeps?

**Louisvillekytruck** · 09-07-2025, 08:18 PM

Received parts everything looks great thanks tony

**72BBChuck** · 09-08-2025, 12:17 AM

I will take the mystery vacuum fitting. How much to 98531? Thanks, Chuck

**71CHEVYSHORTBED402** · 09-08-2025, 05:47 PM

Quote:

Originally Posted by Dave

Hi Tony,
What's the numbers on the distributor? Also, what are the numbers on the window sweeps?

Distributor 1112064-0M7

Sweeps: 3893783-4

Quote:

Originally Posted by Louisvillekytruck

Received parts everything looks great thanks tony

Cool, thank you

Quote:

Originally Posted by 72BBChuck

I will take the mystery vacuum fitting. How much to 98531? Thanks, Chuck

$11, please do not pay with PAYPAL goods and services. PM with your address please, or if MO/check, I'll give you my address, thank you.

**71CHEVYSHORTBED402** · 09-08-2025, 06:15 PM

Posts were addressed above, thanks.

More pictures of the Jack, handle and wrench, these are nice. Wrench is for a 13/16" nut. I dropped the price $20 to $130, edit $120. I buy the box. you pay shipping. USPS puts $100 insurance on packages these days, for "free".

**Dave** · 09-08-2025, 09:27 PM

I'll take the nos sweeps, distributor, coil and brkt. Lmk payment details when you can.
Thanks.

**71CHEVYSHORTBED402** · 09-10-2025, 11:37 AM

Quote:

Originally Posted by Dave

I'll take the nos sweeps, distributor, coil and brkt. Lmk payment details when you can.
Thanks.

Hi Dave, in case you missed the PM, what is your shipping zip code please?

**71CHEVYSHORTBED402** · 09-10-2025, 11:39 AM

I dropped the prices on what's left over. If perhaps the OP wasn't originally clear, the buyer pays shipping.

**Dave** · 09-12-2025, 07:53 PM

Tony, PP has been sent. Thank you.

**71CHEVYSHORTBED402** · 09-15-2025, 10:32 AM

Quote:

Originally Posted by Dave

Tony, PP has been sent. Thank you.

Ooops, I just got the message, thank you Dave, appreciate that. I'll mail it tomorrow morning, insured $150.

**71CHEVYSHORTBED402** · 09-15-2025, 02:45 PM

Prices dropped again. Pretty sure I'm 1/2 available price or better on everything - some free if you buy something, time to clear the table - package deals? Thanks..

**jimer1964** · 09-16-2025, 04:44 PM

Caps arrived safely! Very nice! Thank you!

**71CHEVYSHORTBED402** · 09-30-2025, 06:30 PM

ttt

08-27-2025, 07:52 PM	#1
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,689	Parts Lot, Primarily 1971-ish Truck Stuff Everything here is sold, even if it doesn't read so. The only exceptions are the jack assembly, and the rear license plate lamp. I'll put those on a new thread. Thanks a bunch. NOS Stuff NOS rear license plate lamp, $75 NOS Outer roll-up window sweeps, $150 SOLD NOS Vent Window Channels, for the roll up window's front. I can unwrap them for a picture if you like. I've seen them before, they're perfect, including the chrome strips. Maybe you've seen these before, they're basically GM replacements. The tops aren't quite like original but they work. They do not come with brackets to mount it to the doors, nor the holes for the brackets, they'll have to be drilled, $125. SOLD NOS interior door handles, $100 SOLD NOS replacement rear lenses. These have some of the same markings as GUIDEX lenses, the appearance too, and they're at least as heavy as original. These are better quality than today’s replacements, and are very clean, $20. NOS hose breather Assm., 10118694, probably not for trucks - if you recognize it $2, I think the old pinch clamps are worth that☺ NOS crankcase hose pipe, PCV, adapter, 3856955. Looks like some 66-67s take it, for example, $5 NOS crankcase fire arrestor. I don’t know the application short the fittings are BIG, $25. Nice score if a guy needs it. Okay, $20, no, $15☺, no, $8. NOS emblem paint syringes - apparently. I'll just keep them. NOS vintage radiator hose clamps for couldn’t tell you. If you like them $5. Let me know if you need measurements, they're pretty cool. OEM Stuff OEM lug jack, handle and lug wrench. Works, the metal excellent and real nice finish $120. Two nice C10 hub caps. One never painted and the stainless is perfect. The other was painted and polished, but has a few small dings that are an easy fix, described the arrows in the image. Can’t imagine why someone painted and polished it so nice, dings included. These are not a matching pair, while it's not easy to distinguish, GM installed many varieties of these stainless caps, the differences are primarily at the ring surrounding the bow tie, and weights can vary too. Asking $70 each. SOLD OEM truck tie downs, they’re in excellent shape and will clean-up super if you care to, the finishes are perfect either way. I don’t know what they’re worth, but if someone is looking for these, I think $25 would be a deal. SOLD One NOS Deluxe Badge with some pitting. The other is used, but the chrome is beautiful, $10 for both. Two OEM 400 badges. One has excellent chrome, the other is okay, and was used to experiment with a black epoxy finish. FWW, it held up remarkably under test conditions, $5 OEM oil cap, I think so anyway, hmm. Buy something else it's free. OEM Grille brackets, for a 1971-72, perhaps earlier too, I don’t know. $40 SOLD OEM tail housings, nice shape, $25 SOLD One fuel cap, I believe it's OEM, for an auillary tank, needs a new gasket - buy something it's free. One OEM spare tire bolt and wing nut. It's OEM, but I don't know the application, $10, wing-nut is worth that easy, hmm, maybe I'll keep it☺ Called for☺ Couple of OEM bed towers, buy something it's free. OEM washer bottle bracket, $10 SOLD Nice pliable and clean OEM brake pad: $3 I'll just keep it. Some vacuum fitting, if you recognize it - free if you're paying shipping. called for OEM points distributor and parts. It came off a 1971 402/400. The distributor (1112064-0M7) basically failed back in the 90s, I switched to HEI. I don’t know why the distributor failed, someone else was doing the work. If you want these parts just pay shipping. CALLED FOR Replacement Stuff New replacement sport bumper bolts and hardware. Somewhat replacement, the fronts are supposed to have smaller heads, what can you do, I suspect the fronts aren't reproduced. $8 New replacement bed bolts with hardware, $15 SOLD New replacement 5/16-18 Rally cap bolts, 20 of them, $7 New brake boot, free if you buy something. I'll just keep it. New blower gasket at the firewall. I'll just keep it. New replacement fuel sender for without a return line. Part number 72-9300-S, $20 is half the price otherwise available on this part. New replacement heater water hose tower clamps, $5 New correct type replacement thermostat housing, since painted with POR15 engine. Sprayed if I remember right, turned out pretty nice. I ended up with three of them somehow☺ Spray isn't as durable as a brush with por-15 engine FWW, which applies nicely on cast iron. Looking forward to painting the original housing I thought I wasn't using SOLD Buy something for $15 more I'll put a copy of the kit into the box. It's described by my signature. Attached Images __________________ Tony 1971 C10 Custom Deluxe SWB 402/400TH A/C I developed an assembly information kit for restoring my truck from nuts and bolts. It's written in Assy. order, short & simple, packed with all OEM hardware ID; castings; part ID; 100s of part numbers; wiring simple - Resource, and trivial too. Much info. applies to all 67-72 GM, A/C vehicles, esp. trucks W/O saying. Full search ability, including to 700+ images of illus., parts, charts, Assy., points of interest, cab, bed, & front clip cart plans- Specials and cores were serviced out and R excluded e.g. front/rear glass, body/paint, engine core, rebuilt hinges, steering box, trans, etc. The project was in-line with long former professions developing process, policy, specs, demo, written for novices, admin., policy, engineers, development, systems & test - Public & govt 2, gross. Sell soft copy cheaply, PM if interested.Build thread:https://67-72chevytrucks.com/vboard/...d.php?t=730025 Last edited by 71CHEVYSHORTBED402; 10-05-2025 at 01:06 PM.

08-27-2025, 07:56 PM	#2
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,689	Re: Parts Lot, Primarily 1971-ish Truck Stuff More OEM stuff Attached Images __________________ Tony 1971 C10 Custom Deluxe SWB 402/400TH A/C I developed an assembly information kit for restoring my truck from nuts and bolts. It's written in Assy. order, short & simple, packed with all OEM hardware ID; castings; part ID; 100s of part numbers; wiring simple - Resource, and trivial too. Much info. applies to all 67-72 GM, A/C vehicles, esp. trucks W/O saying. Full search ability, including to 700+ images of illus., parts, charts, Assy., points of interest, cab, bed, & front clip cart plans- Specials and cores were serviced out and R excluded e.g. front/rear glass, body/paint, engine core, rebuilt hinges, steering box, trans, etc. The project was in-line with long former professions developing process, policy, specs, demo, written for novices, admin., policy, engineers, development, systems & test - Public & govt 2, gross. Sell soft copy cheaply, PM if interested.Build thread:https://67-72chevytrucks.com/vboard/...d.php?t=730025

08-27-2025, 07:57 PM	#3
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,689	Re: Parts Lot, Primarily 1971-ish Truck Stuff Replacement stuff Attached Images __________________ Tony 1971 C10 Custom Deluxe SWB 402/400TH A/C I developed an assembly information kit for restoring my truck from nuts and bolts. It's written in Assy. order, short & simple, packed with all OEM hardware ID; castings; part ID; 100s of part numbers; wiring simple - Resource, and trivial too. Much info. applies to all 67-72 GM, A/C vehicles, esp. trucks W/O saying. Full search ability, including to 700+ images of illus., parts, charts, Assy., points of interest, cab, bed, & front clip cart plans- Specials and cores were serviced out and R excluded e.g. front/rear glass, body/paint, engine core, rebuilt hinges, steering box, trans, etc. The project was in-line with long former professions developing process, policy, specs, demo, written for novices, admin., policy, engineers, development, systems & test - Public & govt 2, gross. Sell soft copy cheaply, PM if interested.Build thread:https://67-72chevytrucks.com/vboard/...d.php?t=730025

08-27-2025, 08:08 PM	#4
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,684	Re: Parts Lot, Primarily 1971-ish Truck Stuff I will get in line for the hub caps if you will separate , Also interested in the thermostat housing Thank you Last edited by jimer1964; 08-27-2025 at 08:24 PM.

08-27-2025, 08:43 PM	#5
Louisvillekytruck Senior Member Join Date: Jun 2019 Location: Louisville ky Posts: 1,431	Re: Parts Lot, Primarily 1971-ish Truck Stuff I will take the washer bottle bracket and tail light housings and bed bolts. Let me know how much and how to pay thanks 40291 Last edited by Louisvillekytruck; 08-27-2025 at 09:14 PM.

08-28-2025, 08:37 AM	#12
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,075	Re: Parts Lot, Primarily 1971-ish Truck Stuff Ill take these: NOS interior door handles, $100 *Sold - payment sent __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie) Last edited by D.PASSMORE; 08-29-2025 at 08:53 AM. Reason: xxxx*

09-07-2025, 07:39 PM	#13
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,442	Re: Parts Lot, Primarily 1971-ish Truck Stuff Hi Tony, What's the numbers on the distributor? Also, what are the numbers on the window sweeps?

09-07-2025, 08:18 PM	#14
Louisvillekytruck Senior Member Join Date: Jun 2019 Location: Louisville ky Posts: 1,431	Re: Parts Lot, Primarily 1971-ish Truck Stuff Received parts everything looks great thanks tony

09-08-2025, 12:17 AM	#15
72BBChuck Senior Member Join Date: Jun 2007 Location: SW Washington State Posts: 297	Re: Parts Lot, Primarily 1971-ish Truck Stuff I will take the mystery vacuum fitting. How much to 98531? Thanks, Chuck

09-08-2025, 06:15 PM	#17
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,689	Re: Parts Lot, Primarily 1971-ish Truck Stuff Posts were addressed above, thanks. More pictures of the Jack, handle and wrench, these are nice. Wrench is for a 13/16" nut. I dropped the price $20 to $130, edit $120. I buy the box. you pay shipping. USPS puts $100 insurance on packages these days, for "free". Attached Images __________________ Tony 1971 C10 Custom Deluxe SWB 402/400TH A/C I developed an assembly information kit for restoring my truck from nuts and bolts. It's written in Assy. order, short & simple, packed with all OEM hardware ID; castings; part ID; 100s of part numbers; wiring simple - Resource, and trivial too. Much info. applies to all 67-72 GM, A/C vehicles, esp. trucks W/O saying. Full search ability, including to 700+ images of illus., parts, charts, Assy., points of interest, cab, bed, & front clip cart plans- Specials and cores were serviced out and R excluded e.g. front/rear glass, body/paint, engine core, rebuilt hinges, steering box, trans, etc. The project was in-line with long former professions developing process, policy, specs, demo, written for novices, admin., policy, engineers, development, systems & test - Public & govt 2, gross. Sell soft copy cheaply, PM if interested.Build thread:https://67-72chevytrucks.com/vboard/...d.php?t=730025 Last edited by 71CHEVYSHORTBED402; 10-02-2025 at 10:44 AM.

09-08-2025, 09:27 PM	#18
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,442	Re: Parts Lot, Primarily 1971-ish Truck Stuff I'll take the nos sweeps, distributor, coil and brkt. Lmk payment details when you can. Thanks.

09-10-2025, 11:39 AM	#20
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,689	Re: Parts Lot, Primarily 1971-ish Truck Stuff I dropped the prices on what's left over. If perhaps the OP wasn't originally clear, the buyer pays shipping. __________________ Tony 1971 C10 Custom Deluxe SWB 402/400TH A/C I developed an assembly information kit for restoring my truck from nuts and bolts. It's written in Assy. order, short & simple, packed with all OEM hardware ID; castings; part ID; 100s of part numbers; wiring simple - Resource, and trivial too. Much info. applies to all 67-72 GM, A/C vehicles, esp. trucks W/O saying. Full search ability, including to 700+ images of illus., parts, charts, Assy., points of interest, cab, bed, & front clip cart plans- Specials and cores were serviced out and R excluded e.g. front/rear glass, body/paint, engine core, rebuilt hinges, steering box, trans, etc. The project was in-line with long former professions developing process, policy, specs, demo, written for novices, admin., policy, engineers, development, systems & test - Public & govt 2, gross. Sell soft copy cheaply, PM if interested.Build thread:https://67-72chevytrucks.com/vboard/...d.php?t=730025 Last edited by 71CHEVYSHORTBED402; 09-10-2025 at 11:49 AM.

09-12-2025, 07:53 PM	#21
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,442	Re: Parts Lot, Primarily 1971-ish Truck Stuff Tony, PP has been sent. Thank you.

09-15-2025, 02:45 PM	#23
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,689	Re: Parts Lot, Primarily 1971-ish Truck Stuff Prices dropped again. Pretty sure I'm 1/2 available price or better on everything - some free if you buy something, time to clear the table - package deals? Thanks.. __________________ Tony 1971 C10 Custom Deluxe SWB 402/400TH A/C I developed an assembly information kit for restoring my truck from nuts and bolts. It's written in Assy. order, short & simple, packed with all OEM hardware ID; castings; part ID; 100s of part numbers; wiring simple - Resource, and trivial too. Much info. applies to all 67-72 GM, A/C vehicles, esp. trucks W/O saying. Full search ability, including to 700+ images of illus., parts, charts, Assy., points of interest, cab, bed, & front clip cart plans- Specials and cores were serviced out and R excluded e.g. front/rear glass, body/paint, engine core, rebuilt hinges, steering box, trans, etc. The project was in-line with long former professions developing process, policy, specs, demo, written for novices, admin., policy, engineers, development, systems & test - Public & govt 2, gross. Sell soft copy cheaply, PM if interested.Build thread:https://67-72chevytrucks.com/vboard/...d.php?t=730025

09-16-2025, 04:44 PM	#24
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,684	Re: Parts Lot, Primarily 1971-ish Truck Stuff Caps arrived safely! Very nice! Thank you!



Register or Log In To remove these advertisements.

09-30-2025, 06:30 PM	#25
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,689	Re: Parts Lot, Primarily 1971-ish Truck Stuff ttt __________________ Tony 1971 C10 Custom Deluxe SWB 402/400TH A/C I developed an assembly information kit for restoring my truck from nuts and bolts. It's written in Assy. order, short & simple, packed with all OEM hardware ID; castings; part ID; 100s of part numbers; wiring simple - Resource, and trivial too. Much info. applies to all 67-72 GM, A/C vehicles, esp. trucks W/O saying. Full search ability, including to 700+ images of illus., parts, charts, Assy., points of interest, cab, bed, & front clip cart plans- Specials and cores were serviced out and R excluded e.g. front/rear glass, body/paint, engine core, rebuilt hinges, steering box, trans, etc. The project was in-line with long former professions developing process, policy, specs, demo, written for novices, admin., policy, engineers, development, systems & test - Public & govt 2, gross. Sell soft copy cheaply, PM if interested.Build thread:https://67-72chevytrucks.com/vboard/...d.php?t=730025

Register or Log In To remove these advertisements.