Winshield Gasket/Chrome - The 1947 - Present Chevrolet & GMC Truck Message Board Network

6600DURAMAX · 09-09-2004, 10:12 AM

Looking to replace my windshield and need some advice on were to get a good quality gasket. Also would like to add the chrome trim ring around the outside. Is this possible if the windshield I am using does not have the chrome currently?

Thanks guys

**Classic Heartbeat** · 09-09-2004, 10:25 AM

We cary both the new windsheild gaskets and new stainless trim. Yes it is possible to add the stainless trim to your windsheild, if you replace the gasket with one that accepts it. WES www.ClassicHeartbeat.com

724wdcopper · 09-09-2004, 10:26 AM

all the supplies you need are available from various manufactures and vendors. you just need a whindshield, the chrome trim, the correct rubber window gasket with the channel for the chrome and a whole lot of patients and dish soap! My experience with replacing windshields has been a mixed bag. if i were to use a new gasket, which you will if you want the chrome but currently don't have it, i would lay the gasket somewhere warm. maybe then you can avoid some of the headaches associated with replacing our style windshields.

good luck!

6600DURAMAX · 09-09-2004, 01:28 PM

WES

I looked on the website and cannot locate the ss trim but I do see the gasket price.

Also do you sell the glass or know somewhere that does

Thanks

bc gman · 09-09-2004, 02:44 PM

I replaced my front window and gasket in spring and found that the after- market one did not fit correctly so I ended up getting one fromthe gm dealership for $ 100 more than the first one I tried.there are two styles one with the slot for the chrome ( deluxe ) and the all rubber one.

Brently · 09-09-2004, 03:15 PM

i just completed replacing a windshield that did not have the deluxe chrome with a new windshield, chrome, and rubber - the aftermarket rubber does not fit properly - the gm fits great - also i have two sets of front windshield chrome if interested (they are originals not reproduction stainless) Brent

6600DURAMAX · 09-09-2004, 04:57 PM

Brently

Little confused on what you have for sale? Is it just some windshield chrome and if so what kind of shape,pics, and how much.

I assume you just went to the dealer for the GM windshield gasket?? How much was that item??

Thanks for your help

64fleetside · 09-09-2004, 05:02 PM

I put one in my buddy's 71 last nite, used aftermarket rubber(he's cheap) with used chrome. Fits poorly, I think it will leak w/o sealant. GM weatherstrip all the way, I have installed several of these, the aftermarket(usually Precision) is more of a replacement,it works but just doesn't fit like GM. If you're gonna sell it, use aftermarket. Brian

MOTHERTRUCKERS · 09-09-2004, 08:01 PM

I have never had a problem or a complaint on our windshield gaskets but ours are GM tooled made in America identical to original.

Brently · 09-12-2004, 06:02 PM

i mean i have a set of 67-70 and a set of 71-72 (deep groove and shallow groove) which ever set you needed - i will have to locate them and check condition if interested - just let me know - Brent

cdowns · 09-12-2004, 07:33 PM

to get windshield glass just use the yellow pages"auotmotive glass" it's readily available from your local glass guy

**tkeduk8r** · 09-12-2004, 09:31 PM

not to steal the thread, but i jus ordered a non stainless gasket for my 63 from LMC, i hope it works out.... does the general make these anymore for 60-63 trucks???
--Mike

HuggerCST · 09-12-2004, 10:48 PM

I used a LMC gasket, and the fit is terrible. Especially inside along the top, where it has a 1/4 to 3/8 inch gap. Are GM ones still available at the dealer? Anybody have a part # for a '70 with molding?

MOTHERTRUCKERS · 09-13-2004, 08:54 AM

67-70 with trim groove GM# 3940754 list 113.00 we sell for 95.00.

Huck · 09-13-2004, 09:44 AM

Just a thought---try you local auto glass dealers---explain that this is NOT an insurance deal (they make mega profit on those). Have them get the rubber. You can buy the stainless from any of our great board supporting venders---Mothertruckers, Christians, GMC Paul, Wes, etc. BUT, you might be WAY ahead of the deal by having the local auto glass guy use his supplied rubber and his supplied Glass (their cost is around $50. and it probably comes from Mexico), and HIM doing the install as unless you've done this, it can be a real pain in the butt. With him doing it, he will guarantee it's not leaking which is a very common problem on these trucks. If he needs the rubber, he can get it also from one of our vendors.
Just a word of caution however, the cheepest price is not the best deal. I have had some terrible experience with rubber from LMC and some other vendors--where the rubber started dry rotting within a year!!
Now, it's important to realize that the delux window setup with the stainless is different depending on the year--so to is the delux windshield rubber. One has a deep grove and requires the deep stainless trim while the other has a shallow grove and yada,yada. So it's got to match to work right.
I you buy the material (Glass==$125.+, rubber = $40.+, stainless $95.new+ or used $30-50.+) the +++ are shipping---you get the package for somewhere around $250 to $350. then you get the opportunity to try and put it in without breaking the glass. Either way you would probably have to get the stainless yourself so that's a wash. I would opt for a professional installation with a guaranteed no-leak warranty if it could be had for less then $400.

chickenwing · 09-13-2004, 11:16 PM

Great info guys! I am planning on reusing my trim and have the correct gasket sitting on hand from Chevy Duty. Runnin scared. Think I'll shop around for an install. Anyway, How can I tell if the gasket I have is a "good" one?
Rich

chickenwing · 09-16-2004, 01:24 PM

Broke out the box. Mine is made by Precision. Good bad or ugly?
Rich

**1970 CST Short Wide** · 09-16-2004, 01:30 PM

I'm doing the same thing with the same brand as Chichenwing. I'd like to know also.

Good luck Chicken, I'll let you know how mine comes out

chickenwing · 09-16-2004, 01:34 PM

thanks

**Classic Heartbeat** · 09-16-2004, 05:58 PM

Precision is one of the best out there. I do not know about the others, who's fits and whos do not. I sell precision and use presision and haven't had any problems. (including our Garden Truck project) 6600DURAMAX, I don't have the windsheil trim uploaded onto my website, but if you want to email me I will be happy to answer any questions you have. WES www.ClassicHeartbeat.com

LUV2XCLR8 · 09-16-2004, 06:17 PM

Interesting, I Was Just Thinking About The Gasket Today, I Will
Need To Get On Soon, Here We Have "Jack Morris Auto Glass" For
$156 And Some Change They Will Come To My House And Put It In.
( Reg. Or Tinted )( This Is Provided That You Supply The Gasket )

Jemost 72 · 09-17-2004, 03:16 AM

No more crack! I had an installer come to my house with the new glass and new gasket, re-used my trim-total $196.98,, He used the Precision rubber gasket and the PPG glass with the tint on top. Installed monday morning, rained on tuesday-no leaks.

09-09-2004, 10:12 AM	#1
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,124	Winshield Gasket/Chrome Looking to replace my windshield and need some advice on were to get a good quality gasket. Also would like to add the chrome trim ring around the outside. Is this possible if the windshield I am using does not have the chrome currently? Thanks guys __________________ 1972 K5 - LS3/408 (595Hp) -6L80e-One Tons with 4.56, 20'' Beadlocks with 37'' rubber, full TMI interior, JL Audio ..... 1971 CREWMAX Build.....at body shop for couple more years

09-09-2004, 10:25 AM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	We cary both the new windsheild gaskets and new stainless trim. Yes it is possible to add the stainless trim to your windsheild, if you replace the gasket with one that accepts it. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

09-09-2004, 01:28 PM	#4
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,124	WES I looked on the website and cannot locate the ss trim but I do see the gasket price. Also do you sell the glass or know somewhere that does Thanks __________________ 1972 K5 - LS3/408 (595Hp) -6L80e-One Tons with 4.56, 20'' Beadlocks with 37'' rubber, full TMI interior, JL Audio ..... 1971 CREWMAX Build.....at body shop for couple more years

09-09-2004, 02:44 PM	#5
bc gman 71 bb longhorn Join Date: May 2004 Location: Surrey B.C Canada Posts: 170	I replaced my front window and gasket in spring and found that the after- market one did not fit correctly so I ended up getting one fromthe gm dealership for $ 100 more than the first one I tried.there are two styles one with the slot for the chrome ( deluxe ) and the all rubber one. __________________ 71 2500 Gmc longhorn with a 402 turbo 400. 09 F150 Supercrew 4x4 05 Mazda 6 sport accept that somedays you are the statue and somedays you are the pigeon.

09-09-2004, 03:15 PM	#6
Brently Registered User Join Date: Feb 2002 Location: Chattanooga Posts: 151	chrome around windshield i just completed replacing a windshield that did not have the deluxe chrome with a new windshield, chrome, and rubber - the aftermarket rubber does not fit properly - the gm fits great - also i have two sets of front windshield chrome if interested (they are originals not reproduction stainless) Brent

09-09-2004, 10:26 AM	#3
724wdcopper graphic designer Join Date: May 2004 Location: Spokane, Washington Posts: 841	all the supplies you need are available from various manufactures and vendors. you just need a whindshield, the chrome trim, the correct rubber window gasket with the channel for the chrome and a whole lot of patients and dish soap! My experience with replacing windshields has been a mixed bag. if i were to use a new gasket, which you will if you want the chrome but currently don't have it, i would lay the gasket somewhere warm. maybe then you can avoid some of the headaches associated with replacing our style windshields. good luck!

09-09-2004, 04:57 PM	#7
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,124	windshield gasket Brently Little confused on what you have for sale? Is it just some windshield chrome and if so what kind of shape,pics, and how much. I assume you just went to the dealer for the GM windshield gasket?? How much was that item?? Thanks for your help __________________ 1972 K5 - LS3/408 (595Hp) -6L80e-One Tons with 4.56, 20'' Beadlocks with 37'' rubber, full TMI interior, JL Audio ..... 1971 CREWMAX Build.....at body shop for couple more years

09-09-2004, 05:02 PM	#8
64fleetside Registered User Join Date: Apr 2004 Location: arkieland Posts: 1,070	I put one in my buddy's 71 last nite, used aftermarket rubber(he's cheap) with used chrome. Fits poorly, I think it will leak w/o sealant. GM weatherstrip all the way, I have installed several of these, the aftermarket(usually Precision) is more of a replacement,it works but just doesn't fit like GM. If you're gonna sell it, use aftermarket. Brian

09-09-2004, 08:01 PM	#9
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	I have never had a problem or a complaint on our windshield gaskets but ours are GM tooled made in America identical to original. __________________ Rest in Peace Ed. Thanks for all the good times.

09-12-2004, 06:02 PM	#10
Brently Registered User Join Date: Feb 2002 Location: Chattanooga Posts: 151	windshield chrome i mean i have a set of 67-70 and a set of 71-72 (deep groove and shallow groove) which ever set you needed - i will have to locate them and check condition if interested - just let me know - Brent

09-12-2004, 07:33 PM	#11
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	to get windshield glass just use the yellow pages"auotmotive glass" it's readily available from your local glass guy __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

09-12-2004, 09:31 PM	#12
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	not to steal the thread, but i jus ordered a non stainless gasket for my 63 from LMC, i hope it works out.... does the general make these anymore for 60-63 trucks??? --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

09-12-2004, 10:48 PM	#13
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	I used a LMC gasket, and the fit is terrible. Especially inside along the top, where it has a 1/4 to 3/8 inch gap. Are GM ones still available at the dealer? Anybody have a part # for a '70 with molding? __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

09-13-2004, 08:54 AM	#14
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	67-70 with trim groove GM# 3940754 list 113.00 we sell for 95.00. __________________ Rest in Peace Ed. Thanks for all the good times.

09-13-2004, 09:44 AM	#15
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Just a thought---try you local auto glass dealers---explain that this is NOT an insurance deal (they make mega profit on those). Have them get the rubber. You can buy the stainless from any of our great board supporting venders---Mothertruckers, Christians, GMC Paul, Wes, etc. BUT, you might be WAY ahead of the deal by having the local auto glass guy use his supplied rubber and his supplied Glass (their cost is around $50. and it probably comes from Mexico), and HIM doing the install as unless you've done this, it can be a real pain in the butt. With him doing it, he will guarantee it's not leaking which is a very common problem on these trucks. If he needs the rubber, he can get it also from one of our vendors. Just a word of caution however, the cheepest price is not the best deal. I have had some terrible experience with rubber from LMC and some other vendors--where the rubber started dry rotting within a year!! Now, it's important to realize that the delux window setup with the stainless is different depending on the year--so to is the delux windshield rubber. One has a deep grove and requires the deep stainless trim while the other has a shallow grove and yada,yada. So it's got to match to work right. I you buy the material (Glass==$125.+, rubber = $40.+, stainless $95.new+ or used $30-50.+) the +++ are shipping---you get the package for somewhere around $250 to $350. then you get the opportunity to try and put it in without breaking the glass. Either way you would probably have to get the stainless yourself so that's a wash. I would opt for a professional installation with a guaranteed no-leak warranty if it could be had for less then $400.



Register or Log In To remove these advertisements.

09-13-2004, 11:16 PM	#16
chickenwing Lovin' Life in Miss.! Join Date: Mar 2004 Location: Puckett, Mississippi Posts: 1,937	Great info guys! I am planning on reusing my trim and have the correct gasket sitting on hand from Chevy Duty. Runnin scared. Think I'll shop around for an install. Anyway, How can I tell if the gasket I have is a "good" one? Rich __________________ The truck... you hear that? No really, you did hear that?!!! Last edited by chickenwing; 09-16-2004 at 01:16 PM. Reason: typos

09-16-2004, 01:24 PM	#17
chickenwing Lovin' Life in Miss.! Join Date: Mar 2004 Location: Puckett, Mississippi Posts: 1,937	Broke out the box. Mine is made by Precision. Good bad or ugly? Rich __________________ The truck... you hear that? No really, you did hear that?!!!

09-16-2004, 01:30 PM	#18
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,168	I'm doing the same thing with the same brand as Chichenwing. I'd like to know also. Good luck Chicken, I'll let you know how mine comes out __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

09-16-2004, 01:34 PM	#19
chickenwing Lovin' Life in Miss.! Join Date: Mar 2004 Location: Puckett, Mississippi Posts: 1,937	thanks __________________ The truck... you hear that? No really, you did hear that?!!!

09-16-2004, 05:58 PM	#20
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Precision is one of the best out there. I do not know about the others, who's fits and whos do not. I sell precision and use presision and haven't had any problems. (including our Garden Truck project) 6600DURAMAX, I don't have the windsheil trim uploaded onto my website, but if you want to email me I will be happy to answer any questions you have. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

09-16-2004, 06:17 PM	#21
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Interesting, I Was Just Thinking About The Gasket Today, I Will Need To Get On Soon, Here We Have "Jack Morris Auto Glass" For $156 And Some Change They Will Come To My House And Put It In. ( Reg. Or Tinted )( This Is Provided That You Supply The Gasket ) __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-17-2004, 03:16 AM	#22
Jemost 72 Southern Bowties Join Date: Jan 2003 Location: Fort Worth, TX Posts: 240	No more crack! I had an installer come to my house with the new glass and new gasket, re-used my trim-total $196.98,, He used the Precision rubber gasket and the PPG glass with the tint on top. Installed monday morning, rained on tuesday-no leaks. __________________ 1972 Cheyenne 350/350

Register or Log In To remove these advertisements.