|
09-22-2004, 10:41 PM
|
#1 |
|
Registered User
Join Date: Sep 2004
Posts: 9
|
Flywheel help
hey i just bought my first 67-72 truck
 and it made a weird noise when starting and shuting down i though it was the starter not kicking all the way out or needing shimming well i crawled under there yesterday and the flywheel moves back and forth (left and right) I tightened up the flywheel to converter bolts all I could but it still moves Please help me Thanks
__________________
Parts needed for 68 c10 stepside Pm me if ya got some ya want to sell 
|
|
|
|
09-22-2004, 11:28 PM
|
#2 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
you can try and get in between the converter and the flywheel and try tightening the bolts that hold the flywheel to the crankshaft, you'll have to unbolt the converter and possibally slide the tranny back an inch or 2 to get to them
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
09-24-2004, 01:45 PM
|
#3 |
|
Registered User
Join Date: Sep 2004
Posts: 9
|
ok thanks I gotta get it into the garage first then i'm going to end up droping the tranny and send it out to be rebuilt or repaceing it so 'll try that then thanks again
__________________
Parts needed for 68 c10 stepside Pm me if ya got some ya want to sell
|
|
|
|
|
09-24-2004, 03:36 PM
|
#4 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
if you're going to have the tranny out and you have any doubts at all about your flywheel they're CHEAP around $30 or less at a local parts store
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
