Tachometer Adapter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wootdog · 10-11-2004, 09:24 PM

I had stated probably wrong that my factory tach would not work with the LT1 I have installed. It has the computer hooked to it. Ol Blue gave me some feedback stating that someone by the name of Williamsons might be able to help me out. He referenced Hemming Motor News. I performed a search of the site which didn't help me out. Anyone have any info on this subject? I am real close to getting the 67 on the road. This would help me out tremendously. Thanks for any info you can share. Wootdog

djracer · 10-11-2004, 09:43 PM

What's the motor out of I can check my alarm install software for wire color and location.

Wootdog · 10-11-2004, 10:38 PM

1994 LT1 corvette.

djracer · 10-11-2004, 10:56 PM

If you are using a stock harness the wire should be red/black at the ECM! If you are using an aftermarket harness the manufaturer should be able to tell what wire to use.

10-11-2004, 09:24 PM	#1
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	Tachometer Adapter I had stated probably wrong that my factory tach would not work with the LT1 I have installed. It has the computer hooked to it. Ol Blue gave me some feedback stating that someone by the name of Williamsons might be able to help me out. He referenced Hemming Motor News. I performed a search of the site which didn't help me out. Anyone have any info on this subject? I am real close to getting the 67 on the road. This would help me out tremendously. Thanks for any info you can share. Wootdog __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

10-11-2004, 09:43 PM	#2
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	What's the motor out of I can check my alarm install software for wire color and location. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-11-2004, 10:38 PM	#3
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	re tachometer adapter 1994 LT1 corvette. __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

10-11-2004, 10:56 PM	#4
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	If you are using a stock harness the wire should be red/black at the ECM! If you are using an aftermarket harness the manufaturer should be able to tell what wire to use. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.