|
10-14-2004, 07:13 PM
|
#1 |
|
Registered User
Join Date: Feb 2002
Location: Cadiz, OH
Posts: 628
|
rotor thickness?
What's behind this question is that I don't know what the donor vehicle was for my rotors and calipers, they may not even be from the same truck. I want to replace the calipers but is there a difference from say 1976 and 1982? I do know that the lug studs on the rotor have a larger diameter than my back wheels. I do want to match the caliper with the rotor if there is a difference.
__________________
68 1 ton dually 292, 2001 Sebring, 2004 Trailblazer, 11 Camaro Convertible. |
|
|
|
10-14-2004, 08:44 PM
|
#2 |
|
Join Date: Dec 1999
Location: Eastern - Manitoba Canada, Winnipeg
Posts: 4,369
|
caliper years are limited between these eras.... 71-78 is the same.....79-80 the same .....81-86 the same.... so a 76 wont work with a 82 all according to my hollander manual looking up 1/2 ton ranges.
Seems the rotors will interchange as long as you have 2 3/4 inch rear brakes in your 82. There was a 2 inch rear brake in 81-86 era also, and there different... if I read this right.
__________________
Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
