dash pad covers? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67cst · 10-17-2004, 04:26 AM

i think a while back i saw a shell type thing that fits over the existing dash pad, where can you get these? i checked wes's website and didnt see anything, any other vendors on here have them?

thanks, Derek

70c10 · 10-17-2004, 12:06 PM

I have bought these from LMC. I have seen a few on ebay cheaper. I just installed one last week on my dad's 70' and will be posting pics soon.

barn9 · 10-17-2004, 01:09 PM

Chevy Duty is where I got mine, and I am very happy with it. I saw one yesterday on ebay, but I do not remember who the vendor was, although I do remember he deals in tailgate letter decals, etc.

67cst · 10-17-2004, 01:11 PM

what do they cost? im sure they are a lot less then a new pad, i just need something for my new daily driver

Tx Firefighter · 10-17-2004, 08:09 PM

New pads are 40 bucks. Way better than a cover too.

70c10 · 10-17-2004, 08:36 PM

The covers are $49.95 from LMC compared to about $30 or so from ebay and install in 10 minutes. They look and fit great. If you don't mind doing the job go with a replacement pad.

67cst · 10-17-2004, 10:02 PM

i just need something for a daily driver, i dont feel like pulling the glovebox insert, radio etc to put a new one in

TugOwar · 10-17-2004, 11:25 PM

I kinda like mine without a pad on it. If I could just figure out what to do with those damn holes!

70c10 · 10-17-2004, 11:29 PM

Mig weld them and grind them down for a shaved look!

chickenwing · 10-17-2004, 11:49 PM

I needed a new glove box liner anyway. It looks so good now too. Bite the bullet man and replace the whole dash.

10-17-2004, 04:26 AM	#1
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,303	dash pad covers? i think a while back i saw a shell type thing that fits over the existing dash pad, where can you get these? i checked wes's website and didnt see anything, any other vendors on here have them? thanks, Derek __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

10-17-2004, 12:06 PM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	I have bought these from LMC. I have seen a few on ebay cheaper. I just installed one last week on my dad's 70' and will be posting pics soon. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-17-2004, 01:09 PM	#3
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	Chevy Duty is where I got mine, and I am very happy with it. I saw one yesterday on ebay, but I do not remember who the vendor was, although I do remember he deals in tailgate letter decals, etc. __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

10-17-2004, 01:11 PM	#4
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,303	what do they cost? im sure they are a lot less then a new pad, i just need something for my new daily driver __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

10-17-2004, 08:09 PM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	New pads are 40 bucks. Way better than a cover too. __________________ I'm on the Instagram- @Gearhead_Kevin

10-17-2004, 08:36 PM	#6
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	The covers are $49.95 from LMC compared to about $30 or so from ebay and install in 10 minutes. They look and fit great. If you don't mind doing the job go with a replacement pad. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-17-2004, 10:02 PM	#7
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,303	i just need something for a daily driver, i dont feel like pulling the glovebox insert, radio etc to put a new one in __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

10-17-2004, 11:25 PM	#8
TugOwar Registered User Join Date: Sep 2004 Location: Pleasanton, TX Posts: 1,723	I kinda like mine without a pad on it. If I could just figure out what to do with those damn holes!

10-17-2004, 11:29 PM	#9
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Mig weld them and grind them down for a shaved look! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-17-2004, 11:49 PM	#10
chickenwing Lovin' Life in Miss.! Join Date: Mar 2004 Location: Puckett, Mississippi Posts: 1,937	I needed a new glove box liner anyway. It looks so good now too. Bite the bullet man and replace the whole dash. __________________ The truck... you hear that? No really, you did hear that?!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.