69 GMC parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Paul72 · 10-29-2004, 04:19 PM

I found a 69 GMC P/U for sale today, and wanted to put some feelers out there if there is any interest in parts? It's a 2WD, 283 4-sp, and comes with many extra parts. It's got some surface rust, but pretty solid (by MN standards). The rockers are the only thing that has major rust. I am going to use the box for the K/20 project, all other parts are up for grabs. Some of the extra parts include: guage cluster (non tach), 2 hoods w/ no holes drilled in them, heater box, 2 steering boxes, extra door glass (about 4 I think), and extra gas tank.

I'm going to take a closer look at it this weekend and see if I can get it for a fair price (I don't think it's worth the $1000 he's asking). If I do end up getting it, all prices for parts will be fair and reasonable. I'm in MN and will not ship large parts.

Sorry I can not give any specifics yet as to part condition, I will keep you posted as soon as I get a better look at it.

Paul

gdf_77 · 10-29-2004, 05:22 PM

you dont have any pics of the truck do you? i could use the cab for my 72 4wd if it is pretty solid.

Paul72 · 10-29-2004, 09:08 PM

I just tried to call and there was nobody home. As soon as I get over there to check it out closer, I'll get some pics.

Stay tuned....

wanted · 10-30-2004, 02:15 AM

I'm interested in the cab. Usual rust ok.

Paul72 · 10-30-2004, 06:00 PM

I tried calling again today - no answer. I figure he's out for the weekend. I'll call him on Monday.

Paul72 · 11-03-2004, 01:25 AM

Going to look at it tomorrow. - will get some pics.

cojnit · 11-03-2004, 02:28 PM

I owuld be interested in a great looking grille assembly, complete with bezels and upper grille bar.

Paul72 · 11-03-2004, 04:20 PM

I'm going to pick up the truck on Friday morning - will get pics up by then too.

I've got two in line for the cab and one for the grille assy so far...

Also included in the package (and for sale) is a set of (4) 5-lug rally wheels -these are the wider ones.

Pics on everything coming friday...

Paul

Paul72 · 11-05-2004, 03:14 PM

I drove the truck home today and it runs/drives great! I don't think I have it in me to take apart a solid, running truck. It has a leaf rear axle, and rallys. I have a lot of extra parts that I will post on here in the future.

gdf_77 - the cab has more rust on the floor than I thought. Also has that 'expand-a-foam' around both vent doors (they don't open).

cojnit - the grille assy was hit on the pass side, and the rest of it is daily driver quality at best.

wanted - I may have another cab off of the 72 K/20 - I'll keep you posted.

Like I mentioned, I'll get pics/prices on all of the extra parts.

Have a good weekend,

Paul

10-29-2004, 04:19 PM	#1
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	69 GMC parts I found a 69 GMC P/U for sale today, and wanted to put some feelers out there if there is any interest in parts? It's a 2WD, 283 4-sp, and comes with many extra parts. It's got some surface rust, but pretty solid (by MN standards). The rockers are the only thing that has major rust. I am going to use the box for the K/20 project, all other parts are up for grabs. Some of the extra parts include: guage cluster (non tach), 2 hoods w/ no holes drilled in them, heater box, 2 steering boxes, extra door glass (about 4 I think), and extra gas tank. I'm going to take a closer look at it this weekend and see if I can get it for a fair price (I don't think it's worth the $1000 he's asking). If I do end up getting it, all prices for parts will be fair and reasonable. I'm in MN and will not ship large parts. Sorry I can not give any specifics yet as to part condition, I will keep you posted as soon as I get a better look at it. Paul __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

10-29-2004, 09:08 PM	#3
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	I just tried to call and there was nobody home. As soon as I get over there to check it out closer, I'll get some pics. Stay tuned.... __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

10-30-2004, 06:00 PM	#5
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	I tried calling again today - no answer. I figure he's out for the weekend. I'll call him on Monday. __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

11-03-2004, 01:25 AM	#6
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Going to look at it tomorrow. - will get some pics. __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

11-03-2004, 02:28 PM	#7
cojnit Nothing clever Join Date: Jun 2003 Location: Kailua HI Posts: 828	I owuld be interested in a great looking grille assembly, complete with bezels and upper grille bar. __________________ Got "the Midas Touch!"

10-29-2004, 05:22 PM	#2
gdf_77 Registered User Join Date: Oct 2004 Location: monona, ia USA Posts: 3	you dont have any pics of the truck do you? i could use the cab for my 72 4wd if it is pretty solid.

10-30-2004, 02:15 AM	#4
wanted Registered User Join Date: May 2003 Location: duluth, mn Posts: 63	I'm interested in the cab. Usual rust ok.

11-03-2004, 04:20 PM	#8
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	I'm going to pick up the truck on Friday morning - will get pics up by then too. I've got two in line for the cab and one for the grille assy so far... Also included in the package (and for sale) is a set of (4) 5-lug rally wheels -these are the wider ones. Pics on everything coming friday... Paul __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

11-05-2004, 03:14 PM	#9
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	I drove the truck home today and it runs/drives great! I don't think I have it in me to take apart a solid, running truck. It has a leaf rear axle, and rallys. I have a lot of extra parts that I will post on here in the future. gdf_77 - the cab has more rust on the floor than I thought. Also has that 'expand-a-foam' around both vent doors (they don't open). cojnit - the grille assy was hit on the pass side, and the rest of it is daily driver quality at best. wanted - I may have another cab off of the 72 K/20 - I'll keep you posted. Like I mentioned, I'll get pics/prices on all of the extra parts. Have a good weekend, Paul __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.