Vibration and noise PLEASE - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72chevyLWB · 06-26-2002, 07:04 PM

Carrier bearings are brand new.
Driveshaft will probably get sent away for balancing within a month.
I am going to put in the new converter tomorrow night. I will check all tranny bolts tonight and converter bolts. I had to replace the flywheel before because a tooth broke, but I torqued all bolts from the engine to flywheel so it probably isn't that.
I might have to put a different shim in the pinion because my dad also said that the pinion looks a little shallow. I am going on a 120 mile round trip this weekend with it so I will know for sure if it was the converter or not. Driveshaft is something I have wanted to get balanced, but is too far away. Thanks for the help and if you have any more ideas let me know.

06-26-2002, 07:04 PM	#26
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	Carrier bearings are brand new. Driveshaft will probably get sent away for balancing within a month. I am going to put in the new converter tomorrow night. I will check all tranny bolts tonight and converter bolts. I had to replace the flywheel before because a tooth broke, but I torqued all bolts from the engine to flywheel so it probably isn't that. I might have to put a different shim in the pinion because my dad also said that the pinion looks a little shallow. I am going on a 120 mile round trip this weekend with it so I will know for sure if it was the converter or not. Driveshaft is something I have wanted to get balanced, but is too far away. Thanks for the help and if you have any more ideas let me know. __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.