removing warn hubs, last snap ring? help!

[crosby]

okay, I'm trying to pull some fairly new Warn hubs off the Jimmy before I scrap it (among other things). I've got most of them off, but I am stuck trying to get the last pieces out. Apparently, I have the main body left to remove. It's brass colored, with lots of little holes around the edge. Warn's directions have no pictures, and it feels like there is another snap ring in there somewhere. Here's what I have pulled off so far:

1. hub cover (six torx head bolts)
2. outer snap ring (inside of hub, approx 3" diameter)
3. inner snap ring (on axleshaft, about 1.25" diameter)
4. outer hub body, two pieces (I believe) one slid out, and the other spun out on a threaded shaft.
5. I can't see another snap ring, but the (main body?) won't come out. I don't know if it is threaded on, but that wouldn't make sense. It has all of these little holes around the edge, and little "wings" that stuck out in four places, I believe.

My Haynes manual is useless (OEM hubs and no real pictures), and like I said, the Warn instructions (from their site) have no pictures.

Can anybody help me out here? I feel a little stupid being beat by a set of hubs, but I still need them off. Thanks!!