Courtesy light question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71RestoRod · 02-11-2005, 08:56 PM

If it was the paint, the switches wouldn't be grounding and the lights would be off, so I don't think it's the paint. The way the wire plug into the switch is kind of cheezy.. my guess is that one of your door leads is loose and grounding at one of your jam switches.

If you have an ohm meter you can disconnect the harness at the main connection by the fuse box and check for continuity on the white wire of the harness... there shouldn't be any with the doors closed.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

02-11-2005, 08:56 PM	#5
71RestoRod Registered User Join Date: Sep 2003 Location: Evergreen, CO Posts: 494	If it was the paint, the switches wouldn't be grounding and the lights would be off, so I don't think it's the paint. The way the wire plug into the switch is kind of cheezy.. my guess is that one of your door leads is loose and grounding at one of your jam switches. If you have an ohm meter you can disconnect the harness at the main connection by the fuse box and check for continuity on the white wire of the harness... there shouldn't be any with the doors closed.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.