Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-12-2005, 06:27 PM | #1 |
Senior Member
Join Date: Oct 2004
Location: calhoun city ms
Posts: 940
|
Progress on front end rebuild
Hey guys, after a long hard battle with the coil spring compressor, my front suspension is back together. This includes 5 lug rotors, and disc brakes on the front. I may have to do a little grinding between the new spindle and the bottom edge of the top a arm right out on the end where the upper ball joint is located. Will this problem correct itself when I sit the frame back down on it wheels?
Next I will probably remove rear trailing arms for new bushings and por-15 treatment. Looking at rear disc brakes and a posi-traction unit of some type to bolt into the original 12 bolt housing any suggestions. I already have the 5 lug axles for the rear. I also have 3 inch lower springs for the rear, while I used 2.5 drop spindles for the front with stock height springs. She is going to get in the rear next time boys!!!!!!!
__________________
ongoing 1970 c 10 lwb 1994 z-28 few mods.-owned since new 1978 vette silver/grey 25th anniv. paint |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|