![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
72 Front Sway Bar Bushing question
I am attempting to use the rubber front sway bar bushings from PST on my 72 C10 2wd setup.
The factory bushings I pulled off were all the same shape/size with a split. The 'direct replacements' from PST have two that look like the original four (those go on the brackets that attach to the frame). The other two have taller sides and no split. Problem is, the taller bushings do not allow the bracket to go over enough to mount properly to the lower control arm. I've attached some pics, it shows the larger and smaller bushing included in the PST kit. PST tells me these work, I'm telling them they don't. Any insight?? I'm considering going with GM bushings if they are still available. *EDIT: Looks like the GM bushings are discountinued. Thanks. Joe
__________________
Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member Last edited by Joe67; 02-22-2005 at 06:09 PM. |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|