|
02-26-2005, 12:50 AM
|
#1 |
|
Got Light Emitting Diode?
Join Date: Apr 2004
Location: Newberg, OR
Posts: 2,485
|
MTX amp
i am looking into putting a amp into my truck and i have one MTX 4402 and here are some specs i found on line
2 Channel Amplifier Power 12.5V Rated Power (stereo): 50 W RMS x 2 @ 4 ohms, 2 X 100 WRMS @ 2 Ohms Briged Power 1 X 200 RMS 4 Ohm Mono Power 14.4V Rated Power (stereo): 85 W RMS x 2 @ 4 ohms, 2 X 140 WRMS@ 2 Ohms Briged Power 1 X 280 RMS 4 Ohm Mono Frequency Response: 10 Hz-30 KHz Crossover hi/low 85Hz defeatable Full range RCA output Dimensions: 9.3"L x 9.75"W x 2.1"H yet i can get a MTX 4244 amp for cheap (specs) 4 Channel Amplifier Power 12.5V Rated Power (stereo): 45 W RMS x 4 @ 4 ohms, 4 X 60 WRMS @ 2 Ohms Briged Power 2 X 120 RMS 4 Ohm Mono Power 14.4V Rated Power (stereo): 55 W RMS x 4 @ 4 ohms, 4 X 100 WRMS @ 2 Ohms Briged Power 2 X 200 RMS 4 Ohm Mono Frequency Response: 10 Hz-30 KHz Crossover hi/low 85Hz defeatable Rear Hi pass 85 hz fixed front Full range RCA output Dimensions: 11.5"L x 9.75"W x 2.1"H i dont know alot about amps and i need help understanding. the first amp is in my gfs car and the sub will cut out for a few minutes if it is a heavy bass. i dont want a under powered amp. thanks for any info
__________________
1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's  (the family car)1993 Cherokee work ride/weekend wheeler |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode