Glovebox/CD player Installed *Pics* - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sooner1970_K10 · 04-13-2005, 07:33 PM

Well not many commented on the glovebox I had made. I am very happy with the way the box turned out. Here are some pictures of everything installed. It wasnt as cheap as just cutting a hole in the dash but in 30 mins I could have the truck back to stock

P.S. Yes, I know I forgot to connect the drivers side vent hose back up. While I had everything torn out I cleaned and wiped down all the duct and the inside of the unit that hangs down below the dash.

04-13-2005, 07:33 PM	#1
Sooner1970_K10 1970 K10, 350, 4spd! Join Date: Jun 2004 Location: Shawnee, Ok Posts: 128	Glovebox/CD player Installed Pics Well not many commented on the glovebox I had made. I am very happy with the way the box turned out. Here are some pictures of everything installed. It wasnt as cheap as just cutting a hole in the dash but in 30 mins I could have the truck back to stock P.S. Yes, I know I forgot to connect the drivers side vent hose back up. While I had everything torn out I cleaned and wiped down all the duct and the inside of the unit that hangs down below the dash. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.