Door Panels - Paint or dye??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DirtyBurb86 · 07-13-2005, 07:01 AM

I've been planning for a while to switch the interior of my Burb from tan to black, and I finally have some time to do it. I got a good deal on some black leather seats from a totaled 2001 blazer, and pretty much everything else I need (except black seat belts of course, it seems like you pretty much have to give up your first born to get a set of those). Otherwise, the interior is now totally gutted and I'm ready to go. But my question is, should the door panels be painted with normal rattle can paint or dyed with some premixed SEM spray? I'm not sure of the panels' composition. Any input would be greatly appreciated.

Thanks,
Shawn

07-13-2005, 07:01 AM	#1
DirtyBurb86 Narcissistic Prick Join Date: Dec 2004 Location: So Cal Posts: 87	Door Panels - Paint or dye??? I've been planning for a while to switch the interior of my Burb from tan to black, and I finally have some time to do it. I got a good deal on some black leather seats from a totaled 2001 blazer, and pretty much everything else I need (except black seat belts of course, it seems like you pretty much have to give up your first born to get a set of those). Otherwise, the interior is now totally gutted and I'm ready to go. But my question is, should the door panels be painted with normal rattle can paint or dyed with some premixed SEM spray? I'm not sure of the panels' composition. Any input would be greatly appreciated. Thanks, Shawn __________________ '86 GMC Suburban K2500, 3/4, 4x4, 350/400, 4" susp lift, 35" BFG M/Ts '96 Oldsmobile Aurora, Pure Luxury!!! '03 Mazda6 Sport, V6, 240hp Dead Stock Last edited by DirtyBurb86; 07-13-2005 at 07:05 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.