uneven suspension - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72GMC51 · 07-21-2005, 11:12 PM

All right, I rebuilt the rear end new Eaton posi, left the 4:11 in, put new gas shocks, clean and painted track bar and trailering arms and installed new bushings, a sway bar, installed new 3" drop springs, brakes etc. The problem is the drives side at the rear wheel well is 31' the pass side is 32" ??????????????.

Double check everything can't find the one inch not the floor, tire space is off the one inch also, it is in the suspention, any ideas.
Thanks
JC

07-21-2005, 11:12 PM	#1
72GMC51 72GMC51 Join Date: Jul 2004 Location: Minnesota Posts: 233	uneven suspension All right, I rebuilt the rear end new Eaton posi, left the 4:11 in, put new gas shocks, clean and painted track bar and trailering arms and installed new bushings, a sway bar, installed new 3" drop springs, brakes etc. The problem is the drives side at the rear wheel well is 31' the pass side is 32" ??????????????. Double check everything can't find the one inch not the floor, tire space is off the one inch also, it is in the suspention, any ideas. Thanks JC __________________ 72 GMC 2wd 1/2 long 350 700r4 A/C PS PB 4:10. Are they ever really finished

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.