08-18-2002, 04:18 PM | #1 |
Account Suspended
Join Date: May 2002
Location: Olathe, Kansas
Posts: 929
|
Springs?
Well this weekend I started what seemed to be a small bit of work on the truck. Took it to our shop and started checking things over... low and behold I found about 500.00 worth of work to do LOL. No chances taken.. I like to replace it all if im in there already so it got new tie-rods, ball-joints, control arm bushing kits, Springs front and rear, shock mount bolts and a tilt column
ok ok enough of that.. here's my question New springs front and rear, both Heavy duty from the same manufacture (moog) but the rear is about 2 inches above stock, the front is 1.5inches below stock. What brand's have you guys used? We've never had any trouble from this company when replacing springs... its always right on the money when the height is measured. Would Big Block springs in the front raise it too much? I've never tried. Specs are: 350ci/Auto/Non AC/2wd/LWB/1971 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|