hei install, lol, i dont beleive it! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mtdave2 · 08-26-2005, 05:52 PM

i must have put in a dozen or more hei's. the last several i have done, i pull the cap off and mark the where the dizzy is pointing.

then ill pull the dist out, and set the new one in. ill pull it out a few inches and back in again, until the rotor works its way around to pointing directly at the mark. put the cap back on and fire it up...

never seems to work right, some how i always seem to mess it up. not this time! worked like clock work. took 10 mins to put in, trucked fired right up...

lol, i cant beleive it.

08-26-2005, 05:52 PM	#1
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	hei install, lol, i dont beleive it! i must have put in a dozen or more hei's. the last several i have done, i pull the cap off and mark the where the dizzy is pointing. then ill pull the dist out, and set the new one in. ill pull it out a few inches and back in again, until the rotor works its way around to pointing directly at the mark. put the cap back on and fire it up... never seems to work right, some how i always seem to mess it up. not this time! worked like clock work. took 10 mins to put in, trucked fired right up... lol, i cant beleive it. __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.