|
09-11-2005, 03:27 PM
|
#1 |
|
Registered User
Join Date: Sep 2005
Location: Pocatello, Idaho
Posts: 39
|
PRE '70 D44 question
I have learned a lot on this forum about the D44's and other diffs. You guys are great. However, I still have a few questions. I have a pre '70 Dana 44 front diff with the closed knuckle setup. I am wondering how to change the Ball joints or if it even has ball joints. If it is not too dificult I will just do that. If it is too difficult and/or expensive i will just change the axle. any input from someone experienced here would be greatly apreciated.
__________________
69 Chev K10, 350 4 bolt main, 202 "double humper" heads, healthy cam. edlebrock 600 cfm and preformer intake 3.73 ratio with posi rear.  Check her out http://www.angelfire.com/ak6/1969k10/my_baby Last edited by rmurray25; 09-11-2005 at 04:23 PM. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode