Hyd. clutch setup what all is needed? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevybill · 10-03-2005, 06:44 PM

Hey everybody, I finally have a late model 5 speed manual for my 70 c 10 with a vortec engine. What parts will I need to locate or modify for this conversion? Any ideas on a crossmember? Will I need something special for the engine and tranny since the engine came with an automatic originally?
The tranny is coming from behind a 4.3 V-6. How will I connect my clutch pedal to the hyd. clutch?

Where could I check on ratios for this tranny? It is out of a 99 or 2000 truck.
What am I going to need for the speedometer connection?
any input is appreciated

10-03-2005, 06:44 PM	#1
chevybill Senior Member Join Date: Oct 2004 Location: calhoun city ms Posts: 940	Hyd. clutch setup what all is needed? Hey everybody, I finally have a late model 5 speed manual for my 70 c 10 with a vortec engine. What parts will I need to locate or modify for this conversion? Any ideas on a crossmember? Will I need something special for the engine and tranny since the engine came with an automatic originally? The tranny is coming from behind a 4.3 V-6. How will I connect my clutch pedal to the hyd. clutch? Where could I check on ratios for this tranny? It is out of a 99 or 2000 truck. What am I going to need for the speedometer connection? any input is appreciated __________________ ongoing 1970 c 10 lwb 1994 z-28 few mods.-owned since new 1978 vette silver/grey 25th anniv. paint

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.