5 lug disc crossmember F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 10-10-2005, 10:40 PM

Some where, some one needs this. A parts "pack rat" like me just can't bring myself to cut it up. From a '71 2wd, 5 lug disc set up complete from hub to hub. Upper and lower a-arms, coils, backing plates, spindles, caliper brackets, whole nine yards. Still mounted to frame but can be cut loose. Rotors are rusty and may or may not be useable but brake system was working when truck was wrecked. $125 for complete crossmember with disc brake prop. valve. Local pickup, 30 miles south of Wichita, Ks.

10-10-2005, 10:40 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,284	5 lug disc crossmember F/S Some where, some one needs this. A parts "pack rat" like me just can't bring myself to cut it up. From a '71 2wd, 5 lug disc set up complete from hub to hub. Upper and lower a-arms, coils, backing plates, spindles, caliper brackets, whole nine yards. Still mounted to frame but can be cut loose. Rotors are rusty and may or may not be useable but brake system was working when truck was wrecked. $125 for complete crossmember with disc brake prop. valve. Local pickup, 30 miles south of Wichita, Ks. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.