![]() |
![]() |
#1 |
Registered User
Join Date: Jun 2002
Posts: 15
|
3904390 heads
Should I use these heads or buy some aftermarket? They are currently on my 402, but the motor seems to lack power. I was told these are good heads if you increase the valve sizes. Other people tell me after machining costs I would be better off buying new.
I want to do the Edelbrock performer intake, cam, 750 cfm carb combo at the same time I work on the heads. Any advise would be helpfull. Here are the specs I found: 3904390 66-67 2.06/1.72 325, 350, 390 & 400 98 CC Chambers L-34/L-35/L-36/L-68 396/427 |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|