The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-20-2006, 12:13 AM   #1
GMCMAX
Active Member
 
GMCMAX's Avatar
 
Join Date: Jan 2006
Location: Lower Mid-East Ca.
Posts: 326
Rear leaf arch 4X4-4X2

What's the difference between the arch on 4X4 vs 4X2 rear leaf springs?
I converted my 68 GMC 2wd to 4wd. The front axle and springs are from a 70 blazer, as is the t/case and 4 speed. The rear springs are the 2wd ones the truck came with, but I had to use 4" blocks in the rear to bring it level with the stock front 4wd suspension. Iwould like to put a 4" lift on it, but with the blocks in the back, more blocks aren't the answer. Would the rear leaves from a 4X4 make it right? And yes, adding the 4X4 front axle to the 2wd frame without another to look at or measure was a PITA, but it all works fine.
__________________
Never try to teach a pig to sing; it wastes your time and annoys the pig!

Gets More Chicks

My lugnuts require more torque than your honda makes!

68 GMC, 4X4 conversion w/73 k20 running gear and springs, 350 4spd, 4.10's, D44 powerlok front, 14BFF govlock rear, 33" tires, lifted 4".
GMCMAX is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:04 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com