Clutch problem need help! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Brainchild · 02-23-2006, 01:10 PM

I just swapped a clutch disc in a 67 2 ton.The disc was gone.no material left on it at all.So I just swaped the disc for my boss,used the old pressure plate ect,and now it won't release.
So figuring the plate went bad I took it back out and swapped the pressure plate,and still no joy.The thing will not release,what is going on here?

This truck has the 305 V6,and the pressure plate bolts up with 6 bolts,not evenly spaced around the edge,but the frame of hte plate looks like a triangle,if that makes any sense.

The plate is moving when hte pedal is depressed,but it will not release.

TIA

02-23-2006, 01:10 PM	#1
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	Clutch problem need help! I just swapped a clutch disc in a 67 2 ton.The disc was gone.no material left on it at all.So I just swaped the disc for my boss,used the old pressure plate ect,and now it won't release. So figuring the plate went bad I took it back out and swapped the pressure plate,and still no joy.The thing will not release,what is going on here? This truck has the 305 V6,and the pressure plate bolts up with 6 bolts,not evenly spaced around the edge,but the frame of hte plate looks like a triangle,if that makes any sense. The plate is moving when hte pedal is depressed,but it will not release. TIA __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.