? for the truck Guru's or vendors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

big blue 72 · 02-26-2006, 08:59 PM

about installing power steering on my truck.
original 350 engine , 3 on the tree, non p/s, non p/b.
i have what is suppose to be all the brackets from one truck to set up the p/b pump and stuff, have pulleys, and belts.
I dont know if this will work, as it seems that i dont have any mounting holes in the heads to move the alternator over to the passenger side.
are there any setups that can overcome this?
any pics?

02-26-2006, 08:59 PM	#1
big blue 72 Senior Member Join Date: May 2002 Location: hamilton,ohio,usa Posts: 1,499	? for the truck Guru's or vendors about installing power steering on my truck. original 350 engine , 3 on the tree, non p/s, non p/b. i have what is suppose to be all the brackets from one truck to set up the p/b pump and stuff, have pulleys, and belts. I dont know if this will work, as it seems that i dont have any mounting holes in the heads to move the alternator over to the passenger side. are there any setups that can overcome this? any pics?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.