06-02-2006, 11:27 AM | #1 |
Registered User
Join Date: Dec 2005
Location: Dallas, TX
Posts: 241
|
Steering Column
I swapped out my manual column that had non-tilt, non-intermitent wiper, non-cruise for a manual column with tilt, intermitent wipers, and cruise in my 84 stepside. Everything went together great but now it won't start and the horn doesn't work. I do get all dash lights and gauges reset when I turn the key. Everything with the turn singal stalk works turn signals, high beams, and wipers (not sure about the cruise as I don't have it yet). Any suggestions from anyone that could help me figure out this issue would be great! The only difference between the columns was the module that was mounted on the top side of the column that the harness plugged into. The column that I took out had a blue one, the tilt column had a black one and the harnesses plugged in upside down. I tried to swap the module, but the rod wouldn't line up as the modules are a little different. I'll try to post some pictures later as I didn't have my camera last night. Thanks!
__________________
1984 Chevy Stepside, 4spd granny, 4 1/2 front/6 inch rear drop. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|